Convert Mile to Rod
1 mile = 320 rod (rd). For example, 10 mile = 3,200 rod and 100 mile = 32,000 rod. Type any value below to convert mile to rod both ways — it runs entirely in your browser.
Quick answer: Mile to Rod
1 Mile = 320 Rod (mi → rd). To convert mile to rod, multiply by 320. To convert rod to mile, multiply by 0.003125. The converter at the top does this instantly and both ways; the sections below give the formula, worked examples, a full conversion chart and answers to the most common mile-to-rod questions.
How to convert Mile to Rod
To convert mile to rod, multiply the number of mile by the conversion factor 320, because 1 mi = 320 rd. The conversion is linear, so the same factor works for any value — whole numbers, decimals or fractions. For the reverse direction, 1 rd = 0.003125 mi, so you divide by 320 (or multiply by 0.003125) to turn rod back into mile.
rd = mi × 320 ·
mi = rd × 0.003125
- Write down the value you want to convert, in mile.
- Multiply it by 320.
- The result is the same area/length/quantity expressed in rod.
Mile to Rod — worked examples
Each row shows the exact arithmetic so you can follow the conversion step by step. For example, 5 mile is 1,600 rod because 5 mi × 320 = 1,600 rd.
| Mile | Calculation | Rod |
|---|---|---|
| 1 mi | 1 mi × 320 = 320 rd | 320 rd |
| 2 mi | 2 mi × 320 = 640 rd | 640 rd |
| 3 mi | 3 mi × 320 = 960 rd | 960 rd |
| 5 mi | 5 mi × 320 = 1,600 rd | 1,600 rd |
| 7 mi | 7 mi × 320 = 2,240 rd | 2,240 rd |
| 10 mi | 10 mi × 320 = 3,200 rd | 3,200 rd |
| 12 mi | 12 mi × 320 = 3,840 rd | 3,840 rd |
| 15 mi | 15 mi × 320 = 4,800 rd | 4,800 rd |
| 20 mi | 20 mi × 320 = 6,400 rd | 6,400 rd |
| 25 mi | 25 mi × 320 = 8,000 rd | 8,000 rd |
| 50 mi | 50 mi × 320 = 16,000 rd | 16,000 rd |
| 100 mi | 100 mi × 320 = 32,000 rd | 32,000 rd |
Common Mile to Rod conversions
These are the mile-to-rod values people look up most often. Every figure is computed from the exact factor, so you can rely on them for quick reference:
- 1 mile = 320 rod
- 2 mile = 640 rod
- 2.5 mile = 800 rod
- 3 mile = 960 rod
- 4 mile = 1,280 rod
- 5 mile = 1,600 rod
- 6 mile = 1,920 rod
- 7 mile = 2,240 rod
- 8 mile = 2,560 rod
- 9 mile = 2,880 rod
- 10 mile = 3,200 rod
- 12 mile = 3,840 rod
- 15 mile = 4,800 rod
- 20 mile = 6,400 rod
- 25 mile = 8,000 rod
- 30 mile = 9,600 rod
- 50 mile = 16,000 rod
- 75 mile = 24,000 rod
- 100 mile = 32,000 rod
- 200 mile = 64,000 rod
- 500 mile = 160,000 rod
- 1000 mile = 320,000 rod
Mile to Rod conversion chart (both directions)
The chart below converts mile to rod and rod to mile side by side, so it works whichever way you need. 1 mile = 320 rod, and 1 rod = 0.003125 mile.
| Mile → Rod | Rod → Mile |
|---|---|
| 0.25 mi = 80 rd | 0.25 rd = 0.00078125 mi |
| 0.5 mi = 160 rd | 0.5 rd = 0.0015625 mi |
| 1 mi = 320 rd | 1 rd = 0.003125 mi |
| 2 mi = 640 rd | 2 rd = 0.00625 mi |
| 3 mi = 960 rd | 3 rd = 0.009375 mi |
| 4 mi = 1,280 rd | 4 rd = 0.0125 mi |
| 5 mi = 1,600 rd | 5 rd = 0.015625 mi |
| 6 mi = 1,920 rd | 6 rd = 0.01875 mi |
| 7 mi = 2,240 rd | 7 rd = 0.021875 mi |
| 8 mi = 2,560 rd | 8 rd = 0.025 mi |
| 9 mi = 2,880 rd | 9 rd = 0.028125 mi |
| 10 mi = 3,200 rd | 10 rd = 0.03125 mi |
| 12 mi = 3,840 rd | 12 rd = 0.0375 mi |
| 15 mi = 4,800 rd | 15 rd = 0.046875 mi |
| 20 mi = 6,400 rd | 20 rd = 0.0625 mi |
| 25 mi = 8,000 rd | 25 rd = 0.078125 mi |
| 30 mi = 9,600 rd | 30 rd = 0.09375 mi |
| 40 mi = 12,800 rd | 40 rd = 0.125 mi |
| 50 mi = 16,000 rd | 50 rd = 0.15625 mi |
| 75 mi = 24,000 rd | 75 rd = 0.234375 mi |
| 100 mi = 32,000 rd | 100 rd = 0.3125 mi |
| 150 mi = 48,000 rd | 150 rd = 0.46875 mi |
| 200 mi = 64,000 rd | 200 rd = 0.625 mi |
| 250 mi = 80,000 rd | 250 rd = 0.78125 mi |
| 500 mi = 160,000 rd | 500 rd = 1.5625 mi |
| 1000 mi = 320,000 rd | 1000 rd = 3.125 mi |
Mile vs Rod: which is bigger?
A mile is the larger unit: one mile equals 320 rods. Put another way, you need 320 rods to make a single mile.
What is a Mile? History, origin and usage
The mile descends from the Roman mille passus, 'a thousand paces', where each pace was two steps of about five Roman feet, giving 5,000 Roman feet. The modern statute mile of 5,280 feet was fixed by an English statute under Queen Elizabeth I in 1593, which made the mile equal to eight furlongs.
The mile remains the standard road-distance unit in the United States and the United Kingdom and is widely understood across the English-speaking world. Speed limits in those countries are given in miles per hour.
The jump from 5,000 to 5,280 feet happened so the mile would contain a whole number of furlongs (eight), reconciling Roman and English land measures. The word 'mile' literally preserves the Latin word for 'thousand'.
What is a Rod? History, origin and usage
The rod, also called the perch or pole, measures 16.5 feet and was an English land-survey unit at least as old as the 13th century; the Composition of Yards and Perches under Edward I fixed it at 5.5 yards. 'Perch' derives from the Roman pertica (a measuring pole) and 'rod' from the Old English rodd. A charming legend says the rod was set by lining up the left feet of sixteen men leaving church one Sunday.
The rod was widely used for measuring land, fences and field strips, and four rods make a chain. Today it is largely obsolete but survives in some land records and in older allotment and field measurements.
The peculiar 16.5-foot length lets four rods equal one chain and 160 square rods equal one acre. The 'sixteen men's feet' story is folklore, but it neatly captures how body-based the unit's origins were.
Convert 1 Mile to other units
It can help to see a mile next to the other units it is commonly compared with. One mile (mi) is equal to:
| 1 Mile equals | Unit |
|---|---|
| 1.609344 km | Kilometre |
| 1,609.344 m | Metre |
| 16,093.44 dm | Decimetre |
| 160,934.4 cm | Centimetre |
| 1,609,344 mm | Millimetre |
| 1,609,344,000 µm | Micrometre |
| 1,760 yd | Yard |
| 5,280 ft | Foot |
| 63,360 in | Inch |
| 0.8689762 nmi | Nautical Mile |
| 8 fur | Furlong |
| 80 ch | Chain |
| 8,000 li | Link |
| 320 rd | Rod |
| 320 pole | Pole |
| 880 ftm | Fathom |
| 15,840 hand | Hand |
| 7,040 span | Span |
| 14,080 finger | Finger |
| 3,520 cubit | Cubit |
| 264 rope | Rope |
| 885.1392 ken | Ken |
| 0.3333333 lea | League |
| 4,561,920 pt | Point |
| 0.0000000107578 AU | Astronomical Unit |
| 0.0000000000001701078 ly | Light-year |
| 160.9344 dam | Decametre |
| 16.09344 hm | Hectometre |
| 0.2896587 nl | Nautical League |
Convert 1 Rod to other units
One rod (rd) is equal to:
| 1 Rod equals | Unit |
|---|---|
| 0.0050292 km | Kilometre |
| 5.0292 m | Metre |
| 50.292 dm | Decimetre |
| 502.92 cm | Centimetre |
| 5,029.2 mm | Millimetre |
| 5,029,200 µm | Micrometre |
| 0.003125 mi | Mile |
| 5.5 yd | Yard |
| 16.5 ft | Foot |
| 198 in | Inch |
| 0.002715551 nmi | Nautical Mile |
| 0.025 fur | Furlong |
| 0.25 ch | Chain |
| 25 li | Link |
| 1 pole | Pole |
| 2.75 ftm | Fathom |
| 49.5 hand | Hand |
| 22 span | Span |
| 44 finger | Finger |
| 11 cubit | Cubit |
| 0.825 rope | Rope |
| 2.76606 ken | Ken |
| 0.001041667 lea | League |
| 14,256 pt | Point |
| 0.00000000003361813 AU | Astronomical Unit |
| 0.0000000000000005315869 ly | Light-year |
| 0.50292 dam | Decametre |
| 0.050292 hm | Hectometre |
| 0.0009051836 nl | Nautical League |
Tips for converting Mile to Rod
- To go from mile to rod, multiply by 320; to go back, divide by 320 (or multiply by 0.003125).
- For a quick mental estimate, remember that 1 mile ≈ 320 rod, so 10 mile ≈ 3,200 rod.
- The converter above keeps full precision; the tables round for readability, so use the tool for exact figures.
- Both fields update live as you type — change either side to convert in that direction.
How to use this Mile to Rod converter
Type a number into the Mile field and the equivalent in Rod appears instantly — there is no “convert” button to press and nothing is sent to a server, so it works offline once the page has loaded and is safe for any data. You can also type into the Rod field to convert the other way (rod to mile). Use the swap control to flip the two units, and copy the result with a single click. Because the calculation runs in your browser with full floating-point precision, the converter is more exact than the rounded figures shown in the reference chart above — use the chart for quick look-ups and the tool for precise work.
Accuracy and method
Every figure on this page — the formula, the worked examples, the conversion chart and the “convert to other units” tables — is computed from a single verified conversion factor (1 mi = 320 rd), never copied from a hand-typed lookup table that could drift. That factor is derived from each unit’s definition in terms of a common base unit, and an automated check re-verifies all of the site’s factors on every update, so the numbers here stay correct over time. This matters for mile-to-rod conversions because a small rounding error in a published table compounds quickly at larger quantities; computing from the exact factor avoids that.
Sources
- NIST Special Publication 811 — Guide for the Use of the SI — publishes the exact metric equivalents of the customary units. The inch, foot, yard and mile are defined exactly in metres by the 1959 international yard-and-pound agreement, so every imperial figure on this page is exact, not rounded.
- BIPM — The International System of Units (SI Brochure) — the defining document for the SI, published by the International Bureau of Weights and Measures. It fixes the base unit that this conversion resolves to, which is why the factor here can be exact rather than approximate.
The metric units (km, m, cm, mm, µm) are exact by definition, and the imperial units (mile, yard, foot, inch, nautical mile) use their exact international values. Traditional units (hand, span, finger, cubit, rod/pole, link, rope, ken, league) are given at their commonly accepted standard sizes — historical local values sometimes differed, so confirm against a primary source before relying on them for legal or historical work.
Frequently asked questions
- How many rod are in 1 mile?
- 1 mile = 320 rod (rd). To convert any number of mile to rod, multiply by 320.
- How do I convert mile to rod?
- Multiply the number of mile by 320. For example, 10 mile = 10 × 320 = 3,200 rod, and 25 mile = 8,000 rod.
- How many mile are in 1 rod?
- 1 rod = 0.003125 mile. So to convert rod back to mile, multiply by 0.003125.
- What is the formula to convert mile to rod?
- rod = mile × 320. The reverse formula is mile = rod × 0.003125.
- How much is 100 mile in rod?
- 100 mile = 32,000 rod. (And 1000 mile = 320,000 rod.)
- Which is bigger, a mile or a rod?
- A mile is larger: 1 mile = 320 rod.
- Is this mile to rod converter accurate?
- Yes — every value is computed from the exact 320 rd per mi factor (not rounded look-up tables), and the factors are re-verified automatically on every update.
- Can I convert rod to mile too?
- Yes. The converter works both ways — enter a value in either field. 1 rod = 0.003125 mile.