Convert Foot to Rod
1 foot = 0.06060606 rod (rd). For example, 10 foot = 0.6060606 rod and 100 foot = 6.060606 rod. Type any value below to convert foot to rod both ways — it runs entirely in your browser.
Quick answer: Foot to Rod
1 Foot = 0.06060606 Rod (ft → rd). To convert foot to rod, multiply by 0.06060606. To convert rod to foot, multiply by 16.5. The converter at the top does this instantly and both ways; the sections below give the formula, worked examples, a full conversion chart and answers to the most common foot-to-rod questions.
How to convert Foot to Rod
To convert foot to rod, multiply the number of foot by the conversion factor 0.06060606, because 1 ft = 0.06060606 rd. The conversion is linear, so the same factor works for any value — whole numbers, decimals or fractions. For the reverse direction, 1 rd = 16.5 ft, so you divide by 0.06060606 (or multiply by 16.5) to turn rod back into foot.
rd = ft × 0.06060606 ·
ft = rd × 16.5
- Write down the value you want to convert, in foot.
- Multiply it by 0.06060606.
- The result is the same area/length/quantity expressed in rod.
Foot to Rod — worked examples
Each row shows the exact arithmetic so you can follow the conversion step by step. For example, 5 foot is 0.3030303 rod because 5 ft × 0.06060606 = 0.3030303 rd.
| Foot | Calculation | Rod |
|---|---|---|
| 1 ft | 1 ft × 0.06060606 = 0.06060606 rd | 0.06060606 rd |
| 2 ft | 2 ft × 0.06060606 = 0.1212121 rd | 0.1212121 rd |
| 3 ft | 3 ft × 0.06060606 = 0.1818182 rd | 0.1818182 rd |
| 5 ft | 5 ft × 0.06060606 = 0.3030303 rd | 0.3030303 rd |
| 7 ft | 7 ft × 0.06060606 = 0.4242424 rd | 0.4242424 rd |
| 10 ft | 10 ft × 0.06060606 = 0.6060606 rd | 0.6060606 rd |
| 12 ft | 12 ft × 0.06060606 = 0.7272727 rd | 0.7272727 rd |
| 15 ft | 15 ft × 0.06060606 = 0.9090909 rd | 0.9090909 rd |
| 20 ft | 20 ft × 0.06060606 = 1.212121 rd | 1.212121 rd |
| 25 ft | 25 ft × 0.06060606 = 1.515152 rd | 1.515152 rd |
| 50 ft | 50 ft × 0.06060606 = 3.030303 rd | 3.030303 rd |
| 100 ft | 100 ft × 0.06060606 = 6.060606 rd | 6.060606 rd |
Common Foot to Rod conversions
These are the foot-to-rod values people look up most often. Every figure is computed from the exact factor, so you can rely on them for quick reference:
- 1 foot = 0.06060606 rod
- 2 foot = 0.1212121 rod
- 2.5 foot = 0.1515152 rod
- 3 foot = 0.1818182 rod
- 4 foot = 0.2424242 rod
- 5 foot = 0.3030303 rod
- 6 foot = 0.3636364 rod
- 7 foot = 0.4242424 rod
- 8 foot = 0.4848485 rod
- 9 foot = 0.5454545 rod
- 10 foot = 0.6060606 rod
- 12 foot = 0.7272727 rod
- 15 foot = 0.9090909 rod
- 20 foot = 1.212121 rod
- 25 foot = 1.515152 rod
- 30 foot = 1.818182 rod
- 50 foot = 3.030303 rod
- 75 foot = 4.545455 rod
- 100 foot = 6.060606 rod
- 200 foot = 12.12121 rod
- 500 foot = 30.30303 rod
- 1000 foot = 60.60606 rod
Foot to Rod conversion chart (both directions)
The chart below converts foot to rod and rod to foot side by side, so it works whichever way you need. 1 foot = 0.06060606 rod, and 1 rod = 16.5 foot.
| Foot → Rod | Rod → Foot |
|---|---|
| 0.25 ft = 0.01515152 rd | 0.25 rd = 4.125 ft |
| 0.5 ft = 0.03030303 rd | 0.5 rd = 8.25 ft |
| 1 ft = 0.06060606 rd | 1 rd = 16.5 ft |
| 2 ft = 0.1212121 rd | 2 rd = 33 ft |
| 3 ft = 0.1818182 rd | 3 rd = 49.5 ft |
| 4 ft = 0.2424242 rd | 4 rd = 66 ft |
| 5 ft = 0.3030303 rd | 5 rd = 82.5 ft |
| 6 ft = 0.3636364 rd | 6 rd = 99 ft |
| 7 ft = 0.4242424 rd | 7 rd = 115.5 ft |
| 8 ft = 0.4848485 rd | 8 rd = 132 ft |
| 9 ft = 0.5454545 rd | 9 rd = 148.5 ft |
| 10 ft = 0.6060606 rd | 10 rd = 165 ft |
| 12 ft = 0.7272727 rd | 12 rd = 198 ft |
| 15 ft = 0.9090909 rd | 15 rd = 247.5 ft |
| 20 ft = 1.212121 rd | 20 rd = 330 ft |
| 25 ft = 1.515152 rd | 25 rd = 412.5 ft |
| 30 ft = 1.818182 rd | 30 rd = 495 ft |
| 40 ft = 2.424242 rd | 40 rd = 660 ft |
| 50 ft = 3.030303 rd | 50 rd = 825 ft |
| 75 ft = 4.545455 rd | 75 rd = 1,237.5 ft |
| 100 ft = 6.060606 rd | 100 rd = 1,650 ft |
| 150 ft = 9.090909 rd | 150 rd = 2,475 ft |
| 200 ft = 12.12121 rd | 200 rd = 3,300 ft |
| 250 ft = 15.15152 rd | 250 rd = 4,125 ft |
| 500 ft = 30.30303 rd | 500 rd = 8,250 ft |
| 1000 ft = 60.60606 rd | 1000 rd = 16,500 ft |
Foot vs Rod: which is bigger?
A rod is the larger unit: one rod equals 16.5 foots. Put another way, you need 16.5 foots to make a single rod.
What is a Foot? History, origin and usage
The foot is one of the most ancient units, based on the length of a human foot, and appeared in the Greek, Roman, Chinese and English systems with values ranging from about 250 to 335 mm. The English foot was eventually fixed at 12 inches, and since the 1959 international agreement it equals exactly 0.3048 metres.
The foot is still used in the US and UK for human height, building dimensions and, worldwide, aviation altitudes, since pilots almost everywhere report altitude in feet. It divides into 12 inches, and three feet make a yard.
Aircraft altitudes are measured in feet even in fully metric countries, a legacy of aviation's English-speaking origins. Historically the foot's length differed not only between countries but sometimes between trades within a single city.
What is a Rod? History, origin and usage
The rod, also called the perch or pole, measures 16.5 feet and was an English land-survey unit at least as old as the 13th century; the Composition of Yards and Perches under Edward I fixed it at 5.5 yards. 'Perch' derives from the Roman pertica (a measuring pole) and 'rod' from the Old English rodd. A charming legend says the rod was set by lining up the left feet of sixteen men leaving church one Sunday.
The rod was widely used for measuring land, fences and field strips, and four rods make a chain. Today it is largely obsolete but survives in some land records and in older allotment and field measurements.
The peculiar 16.5-foot length lets four rods equal one chain and 160 square rods equal one acre. The 'sixteen men's feet' story is folklore, but it neatly captures how body-based the unit's origins were.
Convert 1 Foot to other units
It can help to see a foot next to the other units it is commonly compared with. One foot (ft) is equal to:
| 1 Foot equals | Unit |
|---|---|
| 0.0003048 km | Kilometre |
| 0.3048 m | Metre |
| 3.048 dm | Decimetre |
| 30.48 cm | Centimetre |
| 304.8 mm | Millimetre |
| 304,800 µm | Micrometre |
| 0.0001893939 mi | Mile |
| 0.3333333 yd | Yard |
| 12 in | Inch |
| 0.0001645788 nmi | Nautical Mile |
| 0.001515152 fur | Furlong |
| 0.01515152 ch | Chain |
| 1.515152 li | Link |
| 0.06060606 rd | Rod |
| 0.06060606 pole | Pole |
| 0.1666667 ftm | Fathom |
| 3 hand | Hand |
| 1.333333 span | Span |
| 2.666667 finger | Finger |
| 0.6666667 cubit | Cubit |
| 0.05 rope | Rope |
| 0.16764 ken | Ken |
| 0.00006313131 lea | League |
| 864 pt | Point |
| 0.000000000002037462 AU | Astronomical Unit |
| 0.00000000000000003221739 ly | Light-year |
| 0.03048 dam | Decametre |
| 0.003048 hm | Hectometre |
| 0.00005485961 nl | Nautical League |
Convert 1 Rod to other units
One rod (rd) is equal to:
| 1 Rod equals | Unit |
|---|---|
| 0.0050292 km | Kilometre |
| 5.0292 m | Metre |
| 50.292 dm | Decimetre |
| 502.92 cm | Centimetre |
| 5,029.2 mm | Millimetre |
| 5,029,200 µm | Micrometre |
| 0.003125 mi | Mile |
| 5.5 yd | Yard |
| 16.5 ft | Foot |
| 198 in | Inch |
| 0.002715551 nmi | Nautical Mile |
| 0.025 fur | Furlong |
| 0.25 ch | Chain |
| 25 li | Link |
| 1 pole | Pole |
| 2.75 ftm | Fathom |
| 49.5 hand | Hand |
| 22 span | Span |
| 44 finger | Finger |
| 11 cubit | Cubit |
| 0.825 rope | Rope |
| 2.76606 ken | Ken |
| 0.001041667 lea | League |
| 14,256 pt | Point |
| 0.00000000003361813 AU | Astronomical Unit |
| 0.0000000000000005315869 ly | Light-year |
| 0.50292 dam | Decametre |
| 0.050292 hm | Hectometre |
| 0.0009051836 nl | Nautical League |
Tips for converting Foot to Rod
- To go from foot to rod, multiply by 0.06060606; to go back, divide by 0.06060606 (or multiply by 16.5).
- For a quick mental estimate, remember that 1 foot ≈ 0.06060606 rod, so 10 foot ≈ 0.6060606 rod.
- The converter above keeps full precision; the tables round for readability, so use the tool for exact figures.
- Both fields update live as you type — change either side to convert in that direction.
How to use this Foot to Rod converter
Type a number into the Foot field and the equivalent in Rod appears instantly — there is no “convert” button to press and nothing is sent to a server, so it works offline once the page has loaded and is safe for any data. You can also type into the Rod field to convert the other way (rod to foot). Use the swap control to flip the two units, and copy the result with a single click. Because the calculation runs in your browser with full floating-point precision, the converter is more exact than the rounded figures shown in the reference chart above — use the chart for quick look-ups and the tool for precise work.
Accuracy and method
Every figure on this page — the formula, the worked examples, the conversion chart and the “convert to other units” tables — is computed from a single verified conversion factor (1 ft = 0.06060606 rd), never copied from a hand-typed lookup table that could drift. That factor is derived from each unit’s definition in terms of a common base unit, and an automated check re-verifies all of the site’s factors on every update, so the numbers here stay correct over time. This matters for foot-to-rod conversions because a small rounding error in a published table compounds quickly at larger quantities; computing from the exact factor avoids that.
Sources
- NIST Special Publication 811 — Guide for the Use of the SI — publishes the exact metric equivalents of the customary units. The inch, foot, yard and mile are defined exactly in metres by the 1959 international yard-and-pound agreement, so every imperial figure on this page is exact, not rounded.
- BIPM — The International System of Units (SI Brochure) — the defining document for the SI, published by the International Bureau of Weights and Measures. It fixes the base unit that this conversion resolves to, which is why the factor here can be exact rather than approximate.
The metric units (km, m, cm, mm, µm) are exact by definition, and the imperial units (mile, yard, foot, inch, nautical mile) use their exact international values. Traditional units (hand, span, finger, cubit, rod/pole, link, rope, ken, league) are given at their commonly accepted standard sizes — historical local values sometimes differed, so confirm against a primary source before relying on them for legal or historical work.
Frequently asked questions
- How many rod are in 1 foot?
- 1 foot = 0.06060606 rod (rd). To convert any number of foot to rod, multiply by 0.06060606.
- How do I convert foot to rod?
- Multiply the number of foot by 0.06060606. For example, 10 foot = 10 × 0.06060606 = 0.6060606 rod, and 25 foot = 1.515152 rod.
- How many foot are in 1 rod?
- 1 rod = 16.5 foot. So to convert rod back to foot, multiply by 16.5.
- What is the formula to convert foot to rod?
- rod = foot × 0.06060606. The reverse formula is foot = rod × 16.5.
- How much is 100 foot in rod?
- 100 foot = 6.060606 rod. (And 1000 foot = 60.60606 rod.)
- Which is bigger, a foot or a rod?
- A rod is larger: 1 rod = 16.5 foot.
- Is this foot to rod converter accurate?
- Yes — every value is computed from the exact 0.06060606 rd per ft factor (not rounded look-up tables), and the factors are re-verified automatically on every update.
- Can I convert rod to foot too?
- Yes. The converter works both ways — enter a value in either field. 1 rod = 16.5 foot.