Convert Rod to Foot
1 rod = 16.5 foot (ft). For example, 10 rod = 165 foot and 100 rod = 1,650 foot. Type any value below to convert rod to foot both ways — it runs entirely in your browser.
Quick answer: Rod to Foot
1 Rod = 16.5 Foot (rd → ft). To convert rod to foot, multiply by 16.5. To convert foot to rod, multiply by 0.06060606. The converter at the top does this instantly and both ways; the sections below give the formula, worked examples, a full conversion chart and answers to the most common rod-to-foot questions.
How to convert Rod to Foot
To convert rod to foot, multiply the number of rod by the conversion factor 16.5, because 1 rd = 16.5 ft. The conversion is linear, so the same factor works for any value — whole numbers, decimals or fractions. For the reverse direction, 1 ft = 0.06060606 rd, so you divide by 16.5 (or multiply by 0.06060606) to turn foot back into rod.
ft = rd × 16.5 ·
rd = ft × 0.06060606
- Write down the value you want to convert, in rod.
- Multiply it by 16.5.
- The result is the same area/length/quantity expressed in foot.
Rod to Foot — worked examples
Each row shows the exact arithmetic so you can follow the conversion step by step. For example, 5 rod is 82.5 foot because 5 rd × 16.5 = 82.5 ft.
| Rod | Calculation | Foot |
|---|---|---|
| 1 rd | 1 rd × 16.5 = 16.5 ft | 16.5 ft |
| 2 rd | 2 rd × 16.5 = 33 ft | 33 ft |
| 3 rd | 3 rd × 16.5 = 49.5 ft | 49.5 ft |
| 5 rd | 5 rd × 16.5 = 82.5 ft | 82.5 ft |
| 7 rd | 7 rd × 16.5 = 115.5 ft | 115.5 ft |
| 10 rd | 10 rd × 16.5 = 165 ft | 165 ft |
| 12 rd | 12 rd × 16.5 = 198 ft | 198 ft |
| 15 rd | 15 rd × 16.5 = 247.5 ft | 247.5 ft |
| 20 rd | 20 rd × 16.5 = 330 ft | 330 ft |
| 25 rd | 25 rd × 16.5 = 412.5 ft | 412.5 ft |
| 50 rd | 50 rd × 16.5 = 825 ft | 825 ft |
| 100 rd | 100 rd × 16.5 = 1,650 ft | 1,650 ft |
Common Rod to Foot conversions
These are the rod-to-foot values people look up most often. Every figure is computed from the exact factor, so you can rely on them for quick reference:
- 1 rod = 16.5 foot
- 2 rod = 33 foot
- 2.5 rod = 41.25 foot
- 3 rod = 49.5 foot
- 4 rod = 66 foot
- 5 rod = 82.5 foot
- 6 rod = 99 foot
- 7 rod = 115.5 foot
- 8 rod = 132 foot
- 9 rod = 148.5 foot
- 10 rod = 165 foot
- 12 rod = 198 foot
- 15 rod = 247.5 foot
- 20 rod = 330 foot
- 25 rod = 412.5 foot
- 30 rod = 495 foot
- 50 rod = 825 foot
- 75 rod = 1,237.5 foot
- 100 rod = 1,650 foot
- 200 rod = 3,300 foot
- 500 rod = 8,250 foot
- 1000 rod = 16,500 foot
Rod to Foot conversion chart (both directions)
The chart below converts rod to foot and foot to rod side by side, so it works whichever way you need. 1 rod = 16.5 foot, and 1 foot = 0.06060606 rod.
| Rod → Foot | Foot → Rod |
|---|---|
| 0.25 rd = 4.125 ft | 0.25 ft = 0.01515152 rd |
| 0.5 rd = 8.25 ft | 0.5 ft = 0.03030303 rd |
| 1 rd = 16.5 ft | 1 ft = 0.06060606 rd |
| 2 rd = 33 ft | 2 ft = 0.1212121 rd |
| 3 rd = 49.5 ft | 3 ft = 0.1818182 rd |
| 4 rd = 66 ft | 4 ft = 0.2424242 rd |
| 5 rd = 82.5 ft | 5 ft = 0.3030303 rd |
| 6 rd = 99 ft | 6 ft = 0.3636364 rd |
| 7 rd = 115.5 ft | 7 ft = 0.4242424 rd |
| 8 rd = 132 ft | 8 ft = 0.4848485 rd |
| 9 rd = 148.5 ft | 9 ft = 0.5454545 rd |
| 10 rd = 165 ft | 10 ft = 0.6060606 rd |
| 12 rd = 198 ft | 12 ft = 0.7272727 rd |
| 15 rd = 247.5 ft | 15 ft = 0.9090909 rd |
| 20 rd = 330 ft | 20 ft = 1.212121 rd |
| 25 rd = 412.5 ft | 25 ft = 1.515152 rd |
| 30 rd = 495 ft | 30 ft = 1.818182 rd |
| 40 rd = 660 ft | 40 ft = 2.424242 rd |
| 50 rd = 825 ft | 50 ft = 3.030303 rd |
| 75 rd = 1,237.5 ft | 75 ft = 4.545455 rd |
| 100 rd = 1,650 ft | 100 ft = 6.060606 rd |
| 150 rd = 2,475 ft | 150 ft = 9.090909 rd |
| 200 rd = 3,300 ft | 200 ft = 12.12121 rd |
| 250 rd = 4,125 ft | 250 ft = 15.15152 rd |
| 500 rd = 8,250 ft | 500 ft = 30.30303 rd |
| 1000 rd = 16,500 ft | 1000 ft = 60.60606 rd |
Rod vs Foot: which is bigger?
A rod is the larger unit: one rod equals 16.5 foots. Put another way, you need 16.5 foots to make a single rod.
What is a Rod? History, origin and usage
The rod, also called the perch or pole, measures 16.5 feet and was an English land-survey unit at least as old as the 13th century; the Composition of Yards and Perches under Edward I fixed it at 5.5 yards. 'Perch' derives from the Roman pertica (a measuring pole) and 'rod' from the Old English rodd. A charming legend says the rod was set by lining up the left feet of sixteen men leaving church one Sunday.
The rod was widely used for measuring land, fences and field strips, and four rods make a chain. Today it is largely obsolete but survives in some land records and in older allotment and field measurements.
The peculiar 16.5-foot length lets four rods equal one chain and 160 square rods equal one acre. The 'sixteen men's feet' story is folklore, but it neatly captures how body-based the unit's origins were.
What is a Foot? History, origin and usage
The foot is one of the most ancient units, based on the length of a human foot, and appeared in the Greek, Roman, Chinese and English systems with values ranging from about 250 to 335 mm. The English foot was eventually fixed at 12 inches, and since the 1959 international agreement it equals exactly 0.3048 metres.
The foot is still used in the US and UK for human height, building dimensions and, worldwide, aviation altitudes, since pilots almost everywhere report altitude in feet. It divides into 12 inches, and three feet make a yard.
Aircraft altitudes are measured in feet even in fully metric countries, a legacy of aviation's English-speaking origins. Historically the foot's length differed not only between countries but sometimes between trades within a single city.
Convert 1 Rod to other units
It can help to see a rod next to the other units it is commonly compared with. One rod (rd) is equal to:
| 1 Rod equals | Unit |
|---|---|
| 0.0050292 km | Kilometre |
| 5.0292 m | Metre |
| 50.292 dm | Decimetre |
| 502.92 cm | Centimetre |
| 5,029.2 mm | Millimetre |
| 5,029,200 µm | Micrometre |
| 0.003125 mi | Mile |
| 5.5 yd | Yard |
| 16.5 ft | Foot |
| 198 in | Inch |
| 0.002715551 nmi | Nautical Mile |
| 0.025 fur | Furlong |
| 0.25 ch | Chain |
| 25 li | Link |
| 1 pole | Pole |
| 2.75 ftm | Fathom |
| 49.5 hand | Hand |
| 22 span | Span |
| 44 finger | Finger |
| 11 cubit | Cubit |
| 0.825 rope | Rope |
| 2.76606 ken | Ken |
| 0.001041667 lea | League |
| 14,256 pt | Point |
| 0.00000000003361813 AU | Astronomical Unit |
| 0.0000000000000005315869 ly | Light-year |
| 0.50292 dam | Decametre |
| 0.050292 hm | Hectometre |
| 0.0009051836 nl | Nautical League |
Convert 1 Foot to other units
One foot (ft) is equal to:
| 1 Foot equals | Unit |
|---|---|
| 0.0003048 km | Kilometre |
| 0.3048 m | Metre |
| 3.048 dm | Decimetre |
| 30.48 cm | Centimetre |
| 304.8 mm | Millimetre |
| 304,800 µm | Micrometre |
| 0.0001893939 mi | Mile |
| 0.3333333 yd | Yard |
| 12 in | Inch |
| 0.0001645788 nmi | Nautical Mile |
| 0.001515152 fur | Furlong |
| 0.01515152 ch | Chain |
| 1.515152 li | Link |
| 0.06060606 rd | Rod |
| 0.06060606 pole | Pole |
| 0.1666667 ftm | Fathom |
| 3 hand | Hand |
| 1.333333 span | Span |
| 2.666667 finger | Finger |
| 0.6666667 cubit | Cubit |
| 0.05 rope | Rope |
| 0.16764 ken | Ken |
| 0.00006313131 lea | League |
| 864 pt | Point |
| 0.000000000002037462 AU | Astronomical Unit |
| 0.00000000000000003221739 ly | Light-year |
| 0.03048 dam | Decametre |
| 0.003048 hm | Hectometre |
| 0.00005485961 nl | Nautical League |
Tips for converting Rod to Foot
- To go from rod to foot, multiply by 16.5; to go back, divide by 16.5 (or multiply by 0.06060606).
- For a quick mental estimate, remember that 1 rod ≈ 16.5 foot, so 10 rod ≈ 165 foot.
- The converter above keeps full precision; the tables round for readability, so use the tool for exact figures.
- Both fields update live as you type — change either side to convert in that direction.
How to use this Rod to Foot converter
Type a number into the Rod field and the equivalent in Foot appears instantly — there is no “convert” button to press and nothing is sent to a server, so it works offline once the page has loaded and is safe for any data. You can also type into the Foot field to convert the other way (foot to rod). Use the swap control to flip the two units, and copy the result with a single click. Because the calculation runs in your browser with full floating-point precision, the converter is more exact than the rounded figures shown in the reference chart above — use the chart for quick look-ups and the tool for precise work.
Accuracy and method
Every figure on this page — the formula, the worked examples, the conversion chart and the “convert to other units” tables — is computed from a single verified conversion factor (1 rd = 16.5 ft), never copied from a hand-typed lookup table that could drift. That factor is derived from each unit’s definition in terms of a common base unit, and an automated check re-verifies all of the site’s factors on every update, so the numbers here stay correct over time. This matters for rod-to-foot conversions because a small rounding error in a published table compounds quickly at larger quantities; computing from the exact factor avoids that.
Sources
- NIST Special Publication 811 — Guide for the Use of the SI — publishes the exact metric equivalents of the customary units. The inch, foot, yard and mile are defined exactly in metres by the 1959 international yard-and-pound agreement, so every imperial figure on this page is exact, not rounded.
- BIPM — The International System of Units (SI Brochure) — the defining document for the SI, published by the International Bureau of Weights and Measures. It fixes the base unit that this conversion resolves to, which is why the factor here can be exact rather than approximate.
The metric units (km, m, cm, mm, µm) are exact by definition, and the imperial units (mile, yard, foot, inch, nautical mile) use their exact international values. Traditional units (hand, span, finger, cubit, rod/pole, link, rope, ken, league) are given at their commonly accepted standard sizes — historical local values sometimes differed, so confirm against a primary source before relying on them for legal or historical work.
Frequently asked questions
- How many foot are in 1 rod?
- 1 rod = 16.5 foot (ft). To convert any number of rod to foot, multiply by 16.5.
- How do I convert rod to foot?
- Multiply the number of rod by 16.5. For example, 10 rod = 10 × 16.5 = 165 foot, and 25 rod = 412.5 foot.
- How many rod are in 1 foot?
- 1 foot = 0.06060606 rod. So to convert foot back to rod, multiply by 0.06060606.
- What is the formula to convert rod to foot?
- foot = rod × 16.5. The reverse formula is rod = foot × 0.06060606.
- How much is 100 rod in foot?
- 100 rod = 1,650 foot. (And 1000 rod = 16,500 foot.)
- Which is bigger, a rod or a foot?
- A rod is larger: 1 rod = 16.5 foot.
- Is this rod to foot converter accurate?
- Yes — every value is computed from the exact 16.5 ft per rd factor (not rounded look-up tables), and the factors are re-verified automatically on every update.
- Can I convert foot to rod too?
- Yes. The converter works both ways — enter a value in either field. 1 foot = 0.06060606 rod.