Convert Link to Foot
1 link = 0.66 foot (ft). For example, 10 link = 6.6 foot and 100 link = 66 foot. Type any value below to convert link to foot both ways — it runs entirely in your browser.
Quick answer: Link to Foot
1 Link = 0.66 Foot (li → ft). To convert link to foot, multiply by 0.66. To convert foot to link, multiply by 1.515152. The converter at the top does this instantly and both ways; the sections below give the formula, worked examples, a full conversion chart and answers to the most common link-to-foot questions.
How to convert Link to Foot
To convert link to foot, multiply the number of link by the conversion factor 0.66, because 1 li = 0.66 ft. The conversion is linear, so the same factor works for any value — whole numbers, decimals or fractions. For the reverse direction, 1 ft = 1.515152 li, so you divide by 0.66 (or multiply by 1.515152) to turn foot back into link.
ft = li × 0.66 ·
li = ft × 1.515152
- Write down the value you want to convert, in link.
- Multiply it by 0.66.
- The result is the same area/length/quantity expressed in foot.
Link to Foot — worked examples
Each row shows the exact arithmetic so you can follow the conversion step by step. For example, 5 link is 3.3 foot because 5 li × 0.66 = 3.3 ft.
| Link | Calculation | Foot |
|---|---|---|
| 1 li | 1 li × 0.66 = 0.66 ft | 0.66 ft |
| 2 li | 2 li × 0.66 = 1.32 ft | 1.32 ft |
| 3 li | 3 li × 0.66 = 1.98 ft | 1.98 ft |
| 5 li | 5 li × 0.66 = 3.3 ft | 3.3 ft |
| 7 li | 7 li × 0.66 = 4.62 ft | 4.62 ft |
| 10 li | 10 li × 0.66 = 6.6 ft | 6.6 ft |
| 12 li | 12 li × 0.66 = 7.92 ft | 7.92 ft |
| 15 li | 15 li × 0.66 = 9.9 ft | 9.9 ft |
| 20 li | 20 li × 0.66 = 13.2 ft | 13.2 ft |
| 25 li | 25 li × 0.66 = 16.5 ft | 16.5 ft |
| 50 li | 50 li × 0.66 = 33 ft | 33 ft |
| 100 li | 100 li × 0.66 = 66 ft | 66 ft |
Common Link to Foot conversions
These are the link-to-foot values people look up most often. Every figure is computed from the exact factor, so you can rely on them for quick reference:
- 1 link = 0.66 foot
- 2 link = 1.32 foot
- 2.5 link = 1.65 foot
- 3 link = 1.98 foot
- 4 link = 2.64 foot
- 5 link = 3.3 foot
- 6 link = 3.96 foot
- 7 link = 4.62 foot
- 8 link = 5.28 foot
- 9 link = 5.94 foot
- 10 link = 6.6 foot
- 12 link = 7.92 foot
- 15 link = 9.9 foot
- 20 link = 13.2 foot
- 25 link = 16.5 foot
- 30 link = 19.8 foot
- 50 link = 33 foot
- 75 link = 49.5 foot
- 100 link = 66 foot
- 200 link = 132 foot
- 500 link = 330 foot
- 1000 link = 660 foot
Link to Foot conversion chart (both directions)
The chart below converts link to foot and foot to link side by side, so it works whichever way you need. 1 link = 0.66 foot, and 1 foot = 1.515152 link.
| Link → Foot | Foot → Link |
|---|---|
| 0.25 li = 0.165 ft | 0.25 ft = 0.3787879 li |
| 0.5 li = 0.33 ft | 0.5 ft = 0.7575758 li |
| 1 li = 0.66 ft | 1 ft = 1.515152 li |
| 2 li = 1.32 ft | 2 ft = 3.030303 li |
| 3 li = 1.98 ft | 3 ft = 4.545455 li |
| 4 li = 2.64 ft | 4 ft = 6.060606 li |
| 5 li = 3.3 ft | 5 ft = 7.575758 li |
| 6 li = 3.96 ft | 6 ft = 9.090909 li |
| 7 li = 4.62 ft | 7 ft = 10.60606 li |
| 8 li = 5.28 ft | 8 ft = 12.12121 li |
| 9 li = 5.94 ft | 9 ft = 13.63636 li |
| 10 li = 6.6 ft | 10 ft = 15.15152 li |
| 12 li = 7.92 ft | 12 ft = 18.18182 li |
| 15 li = 9.9 ft | 15 ft = 22.72727 li |
| 20 li = 13.2 ft | 20 ft = 30.30303 li |
| 25 li = 16.5 ft | 25 ft = 37.87879 li |
| 30 li = 19.8 ft | 30 ft = 45.45455 li |
| 40 li = 26.4 ft | 40 ft = 60.60606 li |
| 50 li = 33 ft | 50 ft = 75.75758 li |
| 75 li = 49.5 ft | 75 ft = 113.6364 li |
| 100 li = 66 ft | 100 ft = 151.5152 li |
| 150 li = 99 ft | 150 ft = 227.2727 li |
| 200 li = 132 ft | 200 ft = 303.0303 li |
| 250 li = 165 ft | 250 ft = 378.7879 li |
| 500 li = 330 ft | 500 ft = 757.5758 li |
| 1000 li = 660 ft | 1000 ft = 1,515.152 li |
Link vs Foot: which is bigger?
A foot is the larger unit: one foot equals 1.515152 links. Put another way, you need 1.515152 links to make a single foot.
What is a Link? History, origin and usage
The link is one-hundredth of Gunter's surveying chain, making it 7.92 inches long. It was introduced with the chain by Edmund Gunter in 1620 as the small decimal division that let surveyors record distances and areas in convenient hundredths.
The link was used in land surveying alongside the chain, especially for recording fractional-chain distances in old property surveys. It is now obsolete but appears in historical deeds and survey records.
Because the chain was built to make land area decimal, distances measured in links could be squared and turned into acres with simple arithmetic. The seemingly odd 7.92-inch length is just 1/100 of the 66-foot chain.
What is a Foot? History, origin and usage
The foot is one of the most ancient units, based on the length of a human foot, and appeared in the Greek, Roman, Chinese and English systems with values ranging from about 250 to 335 mm. The English foot was eventually fixed at 12 inches, and since the 1959 international agreement it equals exactly 0.3048 metres.
The foot is still used in the US and UK for human height, building dimensions and, worldwide, aviation altitudes, since pilots almost everywhere report altitude in feet. It divides into 12 inches, and three feet make a yard.
Aircraft altitudes are measured in feet even in fully metric countries, a legacy of aviation's English-speaking origins. Historically the foot's length differed not only between countries but sometimes between trades within a single city.
Convert 1 Link to other units
It can help to see a link next to the other units it is commonly compared with. One link (li) is equal to:
| 1 Link equals | Unit |
|---|---|
| 0.000201168 km | Kilometre |
| 0.201168 m | Metre |
| 2.01168 dm | Decimetre |
| 20.1168 cm | Centimetre |
| 201.168 mm | Millimetre |
| 201,168 µm | Micrometre |
| 0.000125 mi | Mile |
| 0.22 yd | Yard |
| 0.66 ft | Foot |
| 7.92 in | Inch |
| 0.000108622 nmi | Nautical Mile |
| 0.001 fur | Furlong |
| 0.01 ch | Chain |
| 0.04 rd | Rod |
| 0.04 pole | Pole |
| 0.11 ftm | Fathom |
| 1.98 hand | Hand |
| 0.88 span | Span |
| 1.76 finger | Finger |
| 0.44 cubit | Cubit |
| 0.033 rope | Rope |
| 0.1106424 ken | Ken |
| 0.00004166667 lea | League |
| 570.24 pt | Point |
| 0.000000000001344725 AU | Astronomical Unit |
| 0.00000000000000002126347 ly | Light-year |
| 0.0201168 dam | Decametre |
| 0.00201168 hm | Hectometre |
| 0.00003620734 nl | Nautical League |
Convert 1 Foot to other units
One foot (ft) is equal to:
| 1 Foot equals | Unit |
|---|---|
| 0.0003048 km | Kilometre |
| 0.3048 m | Metre |
| 3.048 dm | Decimetre |
| 30.48 cm | Centimetre |
| 304.8 mm | Millimetre |
| 304,800 µm | Micrometre |
| 0.0001893939 mi | Mile |
| 0.3333333 yd | Yard |
| 12 in | Inch |
| 0.0001645788 nmi | Nautical Mile |
| 0.001515152 fur | Furlong |
| 0.01515152 ch | Chain |
| 1.515152 li | Link |
| 0.06060606 rd | Rod |
| 0.06060606 pole | Pole |
| 0.1666667 ftm | Fathom |
| 3 hand | Hand |
| 1.333333 span | Span |
| 2.666667 finger | Finger |
| 0.6666667 cubit | Cubit |
| 0.05 rope | Rope |
| 0.16764 ken | Ken |
| 0.00006313131 lea | League |
| 864 pt | Point |
| 0.000000000002037462 AU | Astronomical Unit |
| 0.00000000000000003221739 ly | Light-year |
| 0.03048 dam | Decametre |
| 0.003048 hm | Hectometre |
| 0.00005485961 nl | Nautical League |
Tips for converting Link to Foot
- To go from link to foot, multiply by 0.66; to go back, divide by 0.66 (or multiply by 1.515152).
- For a quick mental estimate, remember that 1 link ≈ 0.66 foot, so 10 link ≈ 6.6 foot.
- The converter above keeps full precision; the tables round for readability, so use the tool for exact figures.
- Both fields update live as you type — change either side to convert in that direction.
How to use this Link to Foot converter
Type a number into the Link field and the equivalent in Foot appears instantly — there is no “convert” button to press and nothing is sent to a server, so it works offline once the page has loaded and is safe for any data. You can also type into the Foot field to convert the other way (foot to link). Use the swap control to flip the two units, and copy the result with a single click. Because the calculation runs in your browser with full floating-point precision, the converter is more exact than the rounded figures shown in the reference chart above — use the chart for quick look-ups and the tool for precise work.
Accuracy and method
Every figure on this page — the formula, the worked examples, the conversion chart and the “convert to other units” tables — is computed from a single verified conversion factor (1 li = 0.66 ft), never copied from a hand-typed lookup table that could drift. That factor is derived from each unit’s definition in terms of a common base unit, and an automated check re-verifies all of the site’s factors on every update, so the numbers here stay correct over time. This matters for link-to-foot conversions because a small rounding error in a published table compounds quickly at larger quantities; computing from the exact factor avoids that.
Sources
- NIST Special Publication 811 — Guide for the Use of the SI — publishes the exact metric equivalents of the customary units. The inch, foot, yard and mile are defined exactly in metres by the 1959 international yard-and-pound agreement, so every imperial figure on this page is exact, not rounded.
- BIPM — The International System of Units (SI Brochure) — the defining document for the SI, published by the International Bureau of Weights and Measures. It fixes the base unit that this conversion resolves to, which is why the factor here can be exact rather than approximate.
The metric units (km, m, cm, mm, µm) are exact by definition, and the imperial units (mile, yard, foot, inch, nautical mile) use their exact international values. Traditional units (hand, span, finger, cubit, rod/pole, link, rope, ken, league) are given at their commonly accepted standard sizes — historical local values sometimes differed, so confirm against a primary source before relying on them for legal or historical work.
Frequently asked questions
- How many foot are in 1 link?
- 1 link = 0.66 foot (ft). To convert any number of link to foot, multiply by 0.66.
- How do I convert link to foot?
- Multiply the number of link by 0.66. For example, 10 link = 10 × 0.66 = 6.6 foot, and 25 link = 16.5 foot.
- How many link are in 1 foot?
- 1 foot = 1.515152 link. So to convert foot back to link, multiply by 1.515152.
- What is the formula to convert link to foot?
- foot = link × 0.66. The reverse formula is link = foot × 1.515152.
- How much is 100 link in foot?
- 100 link = 66 foot. (And 1000 link = 660 foot.)
- Which is bigger, a link or a foot?
- A foot is larger: 1 foot = 1.515152 link.
- Is this link to foot converter accurate?
- Yes — every value is computed from the exact 0.66 ft per li factor (not rounded look-up tables), and the factors are re-verified automatically on every update.
- Can I convert foot to link too?
- Yes. The converter works both ways — enter a value in either field. 1 foot = 1.515152 link.