Convert Mile to Pole
1 mile = 320 pole (pole). For example, 10 mile = 3,200 pole and 100 mile = 32,000 pole. Type any value below to convert mile to pole both ways — it runs entirely in your browser.
Quick answer: Mile to Pole
1 Mile = 320 Pole (mi → pole). To convert mile to pole, multiply by 320. To convert pole to mile, multiply by 0.003125. The converter at the top does this instantly and both ways; the sections below give the formula, worked examples, a full conversion chart and answers to the most common mile-to-pole questions.
How to convert Mile to Pole
To convert mile to pole, multiply the number of mile by the conversion factor 320, because 1 mi = 320 pole. The conversion is linear, so the same factor works for any value — whole numbers, decimals or fractions. For the reverse direction, 1 pole = 0.003125 mi, so you divide by 320 (or multiply by 0.003125) to turn pole back into mile.
pole = mi × 320 ·
mi = pole × 0.003125
- Write down the value you want to convert, in mile.
- Multiply it by 320.
- The result is the same area/length/quantity expressed in pole.
Mile to Pole — worked examples
Each row shows the exact arithmetic so you can follow the conversion step by step. For example, 5 mile is 1,600 pole because 5 mi × 320 = 1,600 pole.
| Mile | Calculation | Pole |
|---|---|---|
| 1 mi | 1 mi × 320 = 320 pole | 320 pole |
| 2 mi | 2 mi × 320 = 640 pole | 640 pole |
| 3 mi | 3 mi × 320 = 960 pole | 960 pole |
| 5 mi | 5 mi × 320 = 1,600 pole | 1,600 pole |
| 7 mi | 7 mi × 320 = 2,240 pole | 2,240 pole |
| 10 mi | 10 mi × 320 = 3,200 pole | 3,200 pole |
| 12 mi | 12 mi × 320 = 3,840 pole | 3,840 pole |
| 15 mi | 15 mi × 320 = 4,800 pole | 4,800 pole |
| 20 mi | 20 mi × 320 = 6,400 pole | 6,400 pole |
| 25 mi | 25 mi × 320 = 8,000 pole | 8,000 pole |
| 50 mi | 50 mi × 320 = 16,000 pole | 16,000 pole |
| 100 mi | 100 mi × 320 = 32,000 pole | 32,000 pole |
Common Mile to Pole conversions
These are the mile-to-pole values people look up most often. Every figure is computed from the exact factor, so you can rely on them for quick reference:
- 1 mile = 320 pole
- 2 mile = 640 pole
- 2.5 mile = 800 pole
- 3 mile = 960 pole
- 4 mile = 1,280 pole
- 5 mile = 1,600 pole
- 6 mile = 1,920 pole
- 7 mile = 2,240 pole
- 8 mile = 2,560 pole
- 9 mile = 2,880 pole
- 10 mile = 3,200 pole
- 12 mile = 3,840 pole
- 15 mile = 4,800 pole
- 20 mile = 6,400 pole
- 25 mile = 8,000 pole
- 30 mile = 9,600 pole
- 50 mile = 16,000 pole
- 75 mile = 24,000 pole
- 100 mile = 32,000 pole
- 200 mile = 64,000 pole
- 500 mile = 160,000 pole
- 1000 mile = 320,000 pole
Mile to Pole conversion chart (both directions)
The chart below converts mile to pole and pole to mile side by side, so it works whichever way you need. 1 mile = 320 pole, and 1 pole = 0.003125 mile.
| Mile → Pole | Pole → Mile |
|---|---|
| 0.25 mi = 80 pole | 0.25 pole = 0.00078125 mi |
| 0.5 mi = 160 pole | 0.5 pole = 0.0015625 mi |
| 1 mi = 320 pole | 1 pole = 0.003125 mi |
| 2 mi = 640 pole | 2 pole = 0.00625 mi |
| 3 mi = 960 pole | 3 pole = 0.009375 mi |
| 4 mi = 1,280 pole | 4 pole = 0.0125 mi |
| 5 mi = 1,600 pole | 5 pole = 0.015625 mi |
| 6 mi = 1,920 pole | 6 pole = 0.01875 mi |
| 7 mi = 2,240 pole | 7 pole = 0.021875 mi |
| 8 mi = 2,560 pole | 8 pole = 0.025 mi |
| 9 mi = 2,880 pole | 9 pole = 0.028125 mi |
| 10 mi = 3,200 pole | 10 pole = 0.03125 mi |
| 12 mi = 3,840 pole | 12 pole = 0.0375 mi |
| 15 mi = 4,800 pole | 15 pole = 0.046875 mi |
| 20 mi = 6,400 pole | 20 pole = 0.0625 mi |
| 25 mi = 8,000 pole | 25 pole = 0.078125 mi |
| 30 mi = 9,600 pole | 30 pole = 0.09375 mi |
| 40 mi = 12,800 pole | 40 pole = 0.125 mi |
| 50 mi = 16,000 pole | 50 pole = 0.15625 mi |
| 75 mi = 24,000 pole | 75 pole = 0.234375 mi |
| 100 mi = 32,000 pole | 100 pole = 0.3125 mi |
| 150 mi = 48,000 pole | 150 pole = 0.46875 mi |
| 200 mi = 64,000 pole | 200 pole = 0.625 mi |
| 250 mi = 80,000 pole | 250 pole = 0.78125 mi |
| 500 mi = 160,000 pole | 500 pole = 1.5625 mi |
| 1000 mi = 320,000 pole | 1000 pole = 3.125 mi |
Mile vs Pole: which is bigger?
A mile is the larger unit: one mile equals 320 poles. Put another way, you need 320 poles to make a single mile.
What is a Mile? History, origin and usage
The mile descends from the Roman mille passus, 'a thousand paces', where each pace was two steps of about five Roman feet, giving 5,000 Roman feet. The modern statute mile of 5,280 feet was fixed by an English statute under Queen Elizabeth I in 1593, which made the mile equal to eight furlongs.
The mile remains the standard road-distance unit in the United States and the United Kingdom and is widely understood across the English-speaking world. Speed limits in those countries are given in miles per hour.
The jump from 5,000 to 5,280 feet happened so the mile would contain a whole number of furlongs (eight), reconciling Roman and English land measures. The word 'mile' literally preserves the Latin word for 'thousand'.
What is a Pole? History, origin and usage
The pole is simply another name for the rod or perch, all denoting the same 16.5-foot length used in old English land surveying. The three names arose from different regions and trades but were standardised to the identical measure.
Like the rod, the pole appears mainly in historical land and agricultural records, for example in describing the size of allotments and gardens. It is rarely used today outside heritage and legal-deed contexts.
'Rod', 'pole' and 'perch' are three names for exactly the same length, a reminder of how many overlapping local units the English system once had. An allotment garden plot was traditionally measured in square poles.
Convert 1 Mile to other units
It can help to see a mile next to the other units it is commonly compared with. One mile (mi) is equal to:
| 1 Mile equals | Unit |
|---|---|
| 1.609344 km | Kilometre |
| 1,609.344 m | Metre |
| 16,093.44 dm | Decimetre |
| 160,934.4 cm | Centimetre |
| 1,609,344 mm | Millimetre |
| 1,609,344,000 µm | Micrometre |
| 1,760 yd | Yard |
| 5,280 ft | Foot |
| 63,360 in | Inch |
| 0.8689762 nmi | Nautical Mile |
| 8 fur | Furlong |
| 80 ch | Chain |
| 8,000 li | Link |
| 320 rd | Rod |
| 320 pole | Pole |
| 880 ftm | Fathom |
| 15,840 hand | Hand |
| 7,040 span | Span |
| 14,080 finger | Finger |
| 3,520 cubit | Cubit |
| 264 rope | Rope |
| 885.1392 ken | Ken |
| 0.3333333 lea | League |
| 4,561,920 pt | Point |
| 0.0000000107578 AU | Astronomical Unit |
| 0.0000000000001701078 ly | Light-year |
| 160.9344 dam | Decametre |
| 16.09344 hm | Hectometre |
| 0.2896587 nl | Nautical League |
Convert 1 Pole to other units
One pole (pole) is equal to:
| 1 Pole equals | Unit |
|---|---|
| 0.0050292 km | Kilometre |
| 5.0292 m | Metre |
| 50.292 dm | Decimetre |
| 502.92 cm | Centimetre |
| 5,029.2 mm | Millimetre |
| 5,029,200 µm | Micrometre |
| 0.003125 mi | Mile |
| 5.5 yd | Yard |
| 16.5 ft | Foot |
| 198 in | Inch |
| 0.002715551 nmi | Nautical Mile |
| 0.025 fur | Furlong |
| 0.25 ch | Chain |
| 25 li | Link |
| 1 rd | Rod |
| 2.75 ftm | Fathom |
| 49.5 hand | Hand |
| 22 span | Span |
| 44 finger | Finger |
| 11 cubit | Cubit |
| 0.825 rope | Rope |
| 2.76606 ken | Ken |
| 0.001041667 lea | League |
| 14,256 pt | Point |
| 0.00000000003361813 AU | Astronomical Unit |
| 0.0000000000000005315869 ly | Light-year |
| 0.50292 dam | Decametre |
| 0.050292 hm | Hectometre |
| 0.0009051836 nl | Nautical League |
Tips for converting Mile to Pole
- To go from mile to pole, multiply by 320; to go back, divide by 320 (or multiply by 0.003125).
- For a quick mental estimate, remember that 1 mile ≈ 320 pole, so 10 mile ≈ 3,200 pole.
- The converter above keeps full precision; the tables round for readability, so use the tool for exact figures.
- Both fields update live as you type — change either side to convert in that direction.
How to use this Mile to Pole converter
Type a number into the Mile field and the equivalent in Pole appears instantly — there is no “convert” button to press and nothing is sent to a server, so it works offline once the page has loaded and is safe for any data. You can also type into the Pole field to convert the other way (pole to mile). Use the swap control to flip the two units, and copy the result with a single click. Because the calculation runs in your browser with full floating-point precision, the converter is more exact than the rounded figures shown in the reference chart above — use the chart for quick look-ups and the tool for precise work.
Accuracy and method
Every figure on this page — the formula, the worked examples, the conversion chart and the “convert to other units” tables — is computed from a single verified conversion factor (1 mi = 320 pole), never copied from a hand-typed lookup table that could drift. That factor is derived from each unit’s definition in terms of a common base unit, and an automated check re-verifies all of the site’s factors on every update, so the numbers here stay correct over time. This matters for mile-to-pole conversions because a small rounding error in a published table compounds quickly at larger quantities; computing from the exact factor avoids that.
Sources
- NIST Special Publication 811 — Guide for the Use of the SI — publishes the exact metric equivalents of the customary units. The inch, foot, yard and mile are defined exactly in metres by the 1959 international yard-and-pound agreement, so every imperial figure on this page is exact, not rounded.
- BIPM — The International System of Units (SI Brochure) — the defining document for the SI, published by the International Bureau of Weights and Measures. It fixes the base unit that this conversion resolves to, which is why the factor here can be exact rather than approximate.
The metric units (km, m, cm, mm, µm) are exact by definition, and the imperial units (mile, yard, foot, inch, nautical mile) use their exact international values. Traditional units (hand, span, finger, cubit, rod/pole, link, rope, ken, league) are given at their commonly accepted standard sizes — historical local values sometimes differed, so confirm against a primary source before relying on them for legal or historical work.
Frequently asked questions
- How many pole are in 1 mile?
- 1 mile = 320 pole (pole). To convert any number of mile to pole, multiply by 320.
- How do I convert mile to pole?
- Multiply the number of mile by 320. For example, 10 mile = 10 × 320 = 3,200 pole, and 25 mile = 8,000 pole.
- How many mile are in 1 pole?
- 1 pole = 0.003125 mile. So to convert pole back to mile, multiply by 0.003125.
- What is the formula to convert mile to pole?
- pole = mile × 320. The reverse formula is mile = pole × 0.003125.
- How much is 100 mile in pole?
- 100 mile = 32,000 pole. (And 1000 mile = 320,000 pole.)
- Which is bigger, a mile or a pole?
- A mile is larger: 1 mile = 320 pole.
- Is this mile to pole converter accurate?
- Yes — every value is computed from the exact 320 pole per mi factor (not rounded look-up tables), and the factors are re-verified automatically on every update.
- Can I convert pole to mile too?
- Yes. The converter works both ways — enter a value in either field. 1 pole = 0.003125 mile.