Convert Marla to Bigha
The bigha is not a fixed size — it varies by state. Across the states below, 1 marla = 0.01–0.03125 bigha. Pick your state for an accurate result; it runs entirely in your browser.
Marla to Bigha by state
Because the bigha differs from state to state, the table below gives the value in each state we cover. The square-foot column is the standard defining value; the metre and conversion columns are computed from it.
| State / region | 1 Bigha (sq ft) | 1 Bigha (m²) | 1 Marla → Bigha | 1 Bigha → Marla |
|---|---|---|---|---|
| Uttar Pradesh, Bihar & Rajasthan (pucca) | 27,225 | 2,529.285 | 0.01 bigha | 100 marla |
| Rajasthan (kachha) | 17,424 | 1,618.743 | 0.015625 bigha | 64 marla |
| Uttar Pradesh (kachha, western UP) | 9,075 | 843.0951 | 0.03 bigha | 33.33333 marla |
| West Bengal | 14,400 | 1,337.804 | 0.01890625 bigha | 52.89256 marla |
| Assam | 14,400 | 1,337.804 | 0.01890625 bigha | 52.89256 marla |
| Madhya Pradesh | 12,000 | 1,114.836 | 0.0226875 bigha | 44.07713 marla |
| Himachal Pradesh (1/5 acre) | 8,712 | 809.3713 | 0.03125 bigha | 32 marla |
| Gujarat (vigha) | 17,424 | 1,618.743 | 0.015625 bigha | 64 marla |
| Haryana & Punjab (kachha basis) * | 9,075 | 843.0951 | 0.03 bigha | 33.33333 marla |
| Haryana & Punjab (pucca basis) * | 27,225 | 2,529.285 | 0.01 bigha | 100 marla |
| Bangladesh * | 14,400 | 1,337.804 | 0.01890625 bigha | 52.89256 marla |
- * Haryana & Punjab (kachha basis): Bigha is not standardised in Haryana/Punjab — local 1/5, 1/4 and 1/2-acre bighas (8,712 / 10,890 / 21,780 sq ft) also exist. Confirm against local records.
- * Haryana & Punjab (pucca basis): Bigha is not standardised in Haryana/Punjab — several local bases exist. Confirm against local records.
- * Bangladesh: Bangladesh is the one place the bigha IS standardised: 20 katha of 720 sq ft each. It is often quoted as "33 decimal", which is a rounding — the exact figure is 33.06 decimal.
In India these land units vary by state and even by district, and local custom can differ from the standard value; in Bangladesh they are standardised nationwide. For any legal, property or financial purpose, confirm the value against your own land records — the patwari or tehsil office in India, or your AC (Land) office and mouza records in Bangladesh — before relying on it.
About marla and bigha
Marla: A marla is 272.25 sq ft (30.25 gaj) — exactly 1/160 acre, and the size used in official land records in Indian Punjab/Haryana and in Pakistan. Many Pakistani housing societies sell a smaller 225 sq ft marla, so check which one your papers use.
Bigha: A bigha is a traditional South Asian land unit whose size is not standardised in India — it ranges from roughly 1,500 to 2,530 m² depending on the state and on whether a "pucca" (large) or "kachha" (small) bigha is meant. In Bangladesh it is fixed at 14,400 sq ft (20 katha).
Frequently asked questions
- How many bigha are in 1 marla?
- It depends on the state, because the bigha is not a fixed size. In Uttar Pradesh, Bihar & Rajasthan (pucca), 1 marla = 0.01 bigha. Across the states listed, the answer ranges from 0.01 to 0.03125 bigha — choose your state in the converter above for an accurate result.
- Why does the bigha vary by state?
- The bigha is a traditional unit recorded differently in each state's revenue system, and many states use a larger "pucca" and a smaller "kachha" version. There is no single national value, so the only correct conversion is the one for your specific state or district.
- How do I convert marla to bigha?
- Pick your state above so the tool uses that state's bigha value, then type the amount. For example, in Uttar Pradesh, Bihar & Rajasthan (pucca), multiply marla by 0.01 to get bigha.
- Which states is the bigha used in?
- This converter covers: Uttar Pradesh, Bihar & Rajasthan (pucca); Rajasthan (kachha); Uttar Pradesh (kachha, western UP); West Bengal; Assam; Madhya Pradesh; Himachal Pradesh (1/5 acre); Gujarat (vigha); Haryana & Punjab (kachha basis); Haryana & Punjab (pucca basis); Bangladesh. For legal or property transactions, always confirm the local value against your own land records — the patwari or tehsil office in India, or your AC (Land) office and mouza records in Bangladesh.
Related area conversions
See all area unit conversions →
Full state-by-state size reference (bigha, biswa, katha, dhur) →
How we calculate this — method, assumptions and limits
The exact conversion
1 marla = 0.01 bigha.
What we assume
The Bigha is not a fixed size. It is defined by local revenue practice, so its area differs by state. This page defaults to Uttar Pradesh, Bihar & Rajasthan (pucca); use the selector to switch, and the result changes with it.
Where the sources agree — and where they don’t
We record a confidence level for every regional value from our research pass, and we publish it rather than hiding it. High means multiple independent references matched. Medium means the value is well attested but corroboration is thinner, so treat it as indicative and confirm against your local record.
| Region | 1 marla in sq ft | Confidence |
|---|---|---|
| Uttar Pradesh, Bihar & Rajasthan (pucca) | 27225 | High |
| Rajasthan (kachha) | 17424 | High |
| Uttar Pradesh (kachha, western UP) | 9075 | Medium |
| West Bengal | 14400 | High |
| Assam | 14400 | High |
| Madhya Pradesh | 12000 | High |
| Himachal Pradesh (1/5 acre) | 8712 | High |
| Gujarat (vigha) | 17424 | High |
| Haryana & Punjab (kachha basis) | 9075 | Medium |
| Haryana & Punjab (pucca basis) | 27225 | Medium |
| Bangladesh | 14400 | High |
Because the documented values genuinely differ between regions, we show each variant instead of averaging them into a single number. An average would be wrong everywhere.
- Haryana & Punjab (kachha basis): Bigha is not standardised in Haryana/Punjab — local 1/5, 1/4 and 1/2-acre bighas (8,712 / 10,890 / 21,780 sq ft) also exist. Confirm against local records.
- Haryana & Punjab (pucca basis): Bigha is not standardised in Haryana/Punjab — several local bases exist. Confirm against local records.
- Bangladesh: Bangladesh is the one place the bigha IS standardised: 20 katha of 720 sq ft each. It is often quoted as "33 decimal", which is a rounding — the exact figure is 33.06 decimal.
What this converter does not account for
- Local custom below state level. Districts and even individual villages can use a different working value from the state norm. The figure here is the state-level standard.
- Values marked medium confidence. These are the ones most worth checking against your own paperwork before you rely on them.
- Historic and pre-survey records. Older deeds may use a value that predates the current survey settlement for that area.
- Legal and transactional use. This is a calculation aid, not a legal document. For a sale, mutation or dispute, the figure that governs is the one in your official land record.
- Rounding in the displayed result. The underlying maths runs at full precision; what you see is rounded for readability, so a long chain of manual conversions may drift slightly.
Sources
- Department of Land Resources, Ministry of Rural Development (India) — the central department responsible for land records and the Digital India Land Records Modernisation Programme, under which the state portals below are maintained.
- Bihar Bhumi — Revenue & Land Reforms Department, Bihar — the official Bihar land-record portal; the authority for katha, dhur and dhurki values used in Bihar revenue records.
- UP Bhulekh — Uttar Pradesh land records — the official Uttar Pradesh record-of-rights portal, used to corroborate bigha and biswa values for UP.
- Wikipedia: Bigha — a cross-check on the historical spread of values, cited for corroboration rather than as a primary authority.
Where references disagree we show the documented variants rather than picking one. Every conversion factor on this site is recomputed and re-verified automatically on each build — the check confirms exact round-trips and cross-unit consistency across all pairs, so a wrong figure fails the build rather than reaching this page.