Convert Megapascal to Pascal
1 megapascal = 1,000,000 pascal (Pa). For example, 10 megapascal = 10,000,000 pascal and 100 megapascal = 100,000,000 pascal. Type any value below to convert megapascal to pascal both ways — it runs entirely in your browser.
Quick answer: Megapascal to Pascal
1 Megapascal = 1,000,000 Pascal (MPa → Pa). To convert megapascal to pascal, multiply by 1,000,000. To convert pascal to megapascal, multiply by 0.000001. The converter at the top does this instantly and both ways; the sections below give the formula, worked examples, a full conversion chart and answers to the most common megapascal-to-pascal questions.
How to convert Megapascal to Pascal
To convert megapascal to pascal, multiply the number of megapascal by the conversion factor 1,000,000, because 1 MPa = 1,000,000 Pa. The conversion is linear, so the same factor works for any value — whole numbers, decimals or fractions. For the reverse direction, 1 Pa = 0.000001 MPa, so you divide by 1,000,000 (or multiply by 0.000001) to turn pascal back into megapascal.
Pa = MPa × 1,000,000 ·
MPa = Pa × 0.000001
- Write down the value you want to convert, in megapascal.
- Multiply it by 1,000,000.
- The result is the same area/length/quantity expressed in pascal.
Megapascal to Pascal — worked examples
Each row shows the exact arithmetic so you can follow the conversion step by step. For example, 5 megapascal is 5,000,000 pascal because 5 MPa × 1,000,000 = 5,000,000 Pa.
| Megapascal | Calculation | Pascal |
|---|---|---|
| 1 MPa | 1 MPa × 1,000,000 = 1,000,000 Pa | 1,000,000 Pa |
| 2 MPa | 2 MPa × 1,000,000 = 2,000,000 Pa | 2,000,000 Pa |
| 3 MPa | 3 MPa × 1,000,000 = 3,000,000 Pa | 3,000,000 Pa |
| 5 MPa | 5 MPa × 1,000,000 = 5,000,000 Pa | 5,000,000 Pa |
| 7 MPa | 7 MPa × 1,000,000 = 7,000,000 Pa | 7,000,000 Pa |
| 10 MPa | 10 MPa × 1,000,000 = 10,000,000 Pa | 10,000,000 Pa |
| 12 MPa | 12 MPa × 1,000,000 = 12,000,000 Pa | 12,000,000 Pa |
| 15 MPa | 15 MPa × 1,000,000 = 15,000,000 Pa | 15,000,000 Pa |
| 20 MPa | 20 MPa × 1,000,000 = 20,000,000 Pa | 20,000,000 Pa |
| 25 MPa | 25 MPa × 1,000,000 = 25,000,000 Pa | 25,000,000 Pa |
| 50 MPa | 50 MPa × 1,000,000 = 50,000,000 Pa | 50,000,000 Pa |
| 100 MPa | 100 MPa × 1,000,000 = 100,000,000 Pa | 100,000,000 Pa |
Common Megapascal to Pascal conversions
These are the megapascal-to-pascal values people look up most often. Every figure is computed from the exact factor, so you can rely on them for quick reference:
- 1 megapascal = 1,000,000 pascal
- 2 megapascal = 2,000,000 pascal
- 2.5 megapascal = 2,500,000 pascal
- 3 megapascal = 3,000,000 pascal
- 4 megapascal = 4,000,000 pascal
- 5 megapascal = 5,000,000 pascal
- 6 megapascal = 6,000,000 pascal
- 7 megapascal = 7,000,000 pascal
- 8 megapascal = 8,000,000 pascal
- 9 megapascal = 9,000,000 pascal
- 10 megapascal = 10,000,000 pascal
- 12 megapascal = 12,000,000 pascal
- 15 megapascal = 15,000,000 pascal
- 20 megapascal = 20,000,000 pascal
- 25 megapascal = 25,000,000 pascal
- 30 megapascal = 30,000,000 pascal
- 50 megapascal = 50,000,000 pascal
- 75 megapascal = 75,000,000 pascal
- 100 megapascal = 100,000,000 pascal
- 200 megapascal = 200,000,000 pascal
- 500 megapascal = 500,000,000 pascal
- 1000 megapascal = 1,000,000,000 pascal
Megapascal to Pascal conversion chart (both directions)
The chart below converts megapascal to pascal and pascal to megapascal side by side, so it works whichever way you need. 1 megapascal = 1,000,000 pascal, and 1 pascal = 0.000001 megapascal.
| Megapascal → Pascal | Pascal → Megapascal |
|---|---|
| 0.25 MPa = 250,000 Pa | 0.25 Pa = 0.00000025 MPa |
| 0.5 MPa = 500,000 Pa | 0.5 Pa = 0.0000005 MPa |
| 1 MPa = 1,000,000 Pa | 1 Pa = 0.000001 MPa |
| 2 MPa = 2,000,000 Pa | 2 Pa = 0.000002 MPa |
| 3 MPa = 3,000,000 Pa | 3 Pa = 0.000003 MPa |
| 4 MPa = 4,000,000 Pa | 4 Pa = 0.000004 MPa |
| 5 MPa = 5,000,000 Pa | 5 Pa = 0.000005 MPa |
| 6 MPa = 6,000,000 Pa | 6 Pa = 0.000006 MPa |
| 7 MPa = 7,000,000 Pa | 7 Pa = 0.000007 MPa |
| 8 MPa = 8,000,000 Pa | 8 Pa = 0.000008 MPa |
| 9 MPa = 9,000,000 Pa | 9 Pa = 0.000009 MPa |
| 10 MPa = 10,000,000 Pa | 10 Pa = 0.00001 MPa |
| 12 MPa = 12,000,000 Pa | 12 Pa = 0.000012 MPa |
| 15 MPa = 15,000,000 Pa | 15 Pa = 0.000015 MPa |
| 20 MPa = 20,000,000 Pa | 20 Pa = 0.00002 MPa |
| 25 MPa = 25,000,000 Pa | 25 Pa = 0.000025 MPa |
| 30 MPa = 30,000,000 Pa | 30 Pa = 0.00003 MPa |
| 40 MPa = 40,000,000 Pa | 40 Pa = 0.00004 MPa |
| 50 MPa = 50,000,000 Pa | 50 Pa = 0.00005 MPa |
| 75 MPa = 75,000,000 Pa | 75 Pa = 0.000075 MPa |
| 100 MPa = 100,000,000 Pa | 100 Pa = 0.0001 MPa |
| 150 MPa = 150,000,000 Pa | 150 Pa = 0.00015 MPa |
| 200 MPa = 200,000,000 Pa | 200 Pa = 0.0002 MPa |
| 250 MPa = 250,000,000 Pa | 250 Pa = 0.00025 MPa |
| 500 MPa = 500,000,000 Pa | 500 Pa = 0.0005 MPa |
| 1000 MPa = 1,000,000,000 Pa | 1000 Pa = 0.001 MPa |
Megapascal vs Pascal: which is bigger?
A megapascal is the larger unit: one megapascal equals 1,000,000 pascals. Put another way, you need 1,000,000 pascals to make a single megapascal.
What is a Megapascal? History, origin and usage
The megapascal became the standard way to state material strength as structural engineering codes moved to SI. It replaced a patchwork of older units — kilograms-force per square centimetre in Europe and Asia, pounds per square inch in the United States and Britain — that made international standards hard to compare.
Megapascals are used wherever pressures or stresses are large: concrete and steel strength, hydraulic systems, injection moulding, and the pressure ratings of pipes and pressure vessels. Ordinary structural concrete is commonly specified somewhere around 20 to 40 MPa.
One megapascal is a million pascals, and also exactly 10 bar, which makes the two easy to swap in your head. One megapascal is also the same as one newton per square millimetre — a coincidence engineers use constantly, because it lets a stress in MPa be read straight off a force in newtons and an area in square millimetres.
What is a Pascal? History, origin and usage
The pascal is named after Blaise Pascal, who in 1648 had his brother-in-law carry a mercury barometer up the Puy de Dôme in central France and watch the mercury column fall as he climbed. That experiment showed air has weight and that the pressure it exerts drops with height. The unit itself is much younger: the name was adopted by the General Conference on Weights and Measures in 1971, replacing the older habit of writing pressures as "newtons per square metre".
The pascal is the SI unit of pressure and the base every other unit on this page is defined against. On its own it is awkwardly small for daily life — a sheet of paper resting on a table presses down with only a few pascals — so real-world figures are almost always given with a prefix: hectopascals for weather, kilopascals for tyres and gas, megapascals for concrete and hydraulics.
One pascal is one newton spread over one square metre, which is about the pressure of a five-rupee coin lying flat on a table. Because pressure is force divided by area, the same push concentrated into a smaller area gives a much higher pressure — which is why a drawing pin goes into a wall and your thumb does not.
Convert 1 Megapascal to other units
It can help to see a megapascal next to the other units it is commonly compared with. One megapascal (MPa) is equal to:
| 1 Megapascal equals | Unit |
|---|---|
| 1,000,000 Pa | Pascal |
| 10,000 hPa | Hectopascal |
| 1,000 kPa | Kilopascal |
| 10,000 mbar | Millibar |
| 10 bar | Bar |
| 9.869233 atm | Standard atmosphere |
| 7,500.617 Torr | Torr |
| 7,500.616 mmHg | Millimetre of mercury |
| 295.2998 inHg | Inch of mercury |
| 101,971.6 mmH₂O | Millimetre of water |
| 4,014.631 inH₂O | Inch of water |
| 145.0377 psi | Pound per square inch |
| 10.19716 kgf/cm² | Kilogram-force per square centimetre |
Convert 1 Pascal to other units
One pascal (Pa) is equal to:
| 1 Pascal equals | Unit |
|---|---|
| 0.01 hPa | Hectopascal |
| 0.001 kPa | Kilopascal |
| 0.000001 MPa | Megapascal |
| 0.01 mbar | Millibar |
| 0.00001 bar | Bar |
| 0.000009869233 atm | Standard atmosphere |
| 0.007500617 Torr | Torr |
| 0.007500616 mmHg | Millimetre of mercury |
| 0.0002952998 inHg | Inch of mercury |
| 0.1019716 mmH₂O | Millimetre of water |
| 0.004014631 inH₂O | Inch of water |
| 0.0001450377 psi | Pound per square inch |
| 0.00001019716 kgf/cm² | Kilogram-force per square centimetre |
Tips for converting Megapascal to Pascal
- To go from megapascal to pascal, multiply by 1,000,000; to go back, divide by 1,000,000 (or multiply by 0.000001).
- For a quick mental estimate, remember that 1 megapascal ≈ 1,000,000 pascal, so 10 megapascal ≈ 10,000,000 pascal.
- The converter above keeps full precision; the tables round for readability, so use the tool for exact figures.
- Both fields update live as you type — change either side to convert in that direction.
How to use this Megapascal to Pascal converter
Type a number into the Megapascal field and the equivalent in Pascal appears instantly — there is no “convert” button to press and nothing is sent to a server, so it works offline once the page has loaded and is safe for any data. You can also type into the Pascal field to convert the other way (pascal to megapascal). Use the swap control to flip the two units, and copy the result with a single click. Because the calculation runs in your browser with full floating-point precision, the converter is more exact than the rounded figures shown in the reference chart above — use the chart for quick look-ups and the tool for precise work.
Accuracy and method
Every figure on this page — the formula, the worked examples, the conversion chart and the “convert to other units” tables — is computed from a single verified conversion factor (1 MPa = 1,000,000 Pa), never copied from a hand-typed lookup table that could drift. That factor is derived from each unit’s definition in terms of a common base unit, and an automated check re-verifies all of the site’s factors on every update, so the numbers here stay correct over time. This matters for megapascal-to-pascal conversions because a small rounding error in a published table compounds quickly at larger quantities; computing from the exact factor avoids that.
Sources
- BIPM — The International System of Units (SI Brochure) — the defining document for the SI, published by the International Bureau of Weights and Measures. It fixes the base unit that this conversion resolves to, which is why the factor here can be exact rather than approximate.
- NIST — Definitions of the SI base units — the US National Institute of Standards and Technology reference for the SI base units, used here as an independent cross-check on the base-unit definition.
Pressure factors here come from fixed definitions, anchored to the pascal: a bar is exactly 100,000 Pa, one atmosphere is exactly 101,325 Pa, a torr is exactly a 760th of an atmosphere, and psi is built from the exact pound and the exact inch. Two of them — psi and the torr — work out to decimals that repeat forever, so where a number is shown rounded it is marked, not quietly trimmed.
Frequently asked questions
- How many pascal are in 1 megapascal?
- 1 megapascal = 1,000,000 pascal (Pa). To convert any number of megapascal to pascal, multiply by 1,000,000.
- How do I convert megapascal to pascal?
- Multiply the number of megapascal by 1,000,000. For example, 10 megapascal = 10 × 1,000,000 = 10,000,000 pascal, and 25 megapascal = 25,000,000 pascal.
- How many megapascal are in 1 pascal?
- 1 pascal = 0.000001 megapascal. So to convert pascal back to megapascal, multiply by 0.000001.
- What is the formula to convert megapascal to pascal?
- pascal = megapascal × 1,000,000. The reverse formula is megapascal = pascal × 0.000001.
- How much is 100 megapascal in pascal?
- 100 megapascal = 100,000,000 pascal. (And 1000 megapascal = 1,000,000,000 pascal.)
- Which is bigger, a megapascal or a pascal?
- A megapascal is larger: 1 megapascal = 1,000,000 pascal.
- Is this megapascal to pascal converter accurate?
- Yes — every value is computed from the exact 1,000,000 Pa per MPa factor (not rounded look-up tables), and the factors are re-verified automatically on every update.
- Can I convert pascal to megapascal too?
- Yes. The converter works both ways — enter a value in either field. 1 pascal = 0.000001 megapascal.