Convert Standard atmosphere to Pound per square inch
1 standard atmosphere = 14.69595 pound per square inch (psi). For example, 10 standard atmosphere = 146.9595 pound per square inch and 100 standard atmosphere = 1,469.595 pound per square inch. Type any value below to convert standard atmosphere to pound per square inch both ways — it runs entirely in your browser.
Quick answer: Standard atmosphere to Pound per square inch
1 Standard atmosphere = 14.69595 Pound per square inch (atm → psi). To convert standard atmosphere to pound per square inch, multiply by 14.69595. To convert pound per square inch to standard atmosphere, multiply by 0.06804596. The converter at the top does this instantly and both ways; the sections below give the formula, worked examples, a full conversion chart and answers to the most common standard atmosphere-to-pound per square inch questions.
How to convert Standard atmosphere to Pound per square inch
To convert standard atmosphere to pound per square inch, multiply the number of standard atmosphere by the conversion factor 14.69595, because 1 atm = 14.69595 psi. The conversion is linear, so the same factor works for any value — whole numbers, decimals or fractions. For the reverse direction, 1 psi = 0.06804596 atm, so you divide by 14.69595 (or multiply by 0.06804596) to turn pound per square inch back into standard atmosphere.
psi = atm × 14.69595 ·
atm = psi × 0.06804596
- Write down the value you want to convert, in standard atmosphere.
- Multiply it by 14.69595.
- The result is the same area/length/quantity expressed in pound per square inch.
Standard atmosphere to Pound per square inch — worked examples
Each row shows the exact arithmetic so you can follow the conversion step by step. For example, 5 standard atmosphere is 73.47974 pound per square inch because 5 atm × 14.69595 = 73.47974 psi.
| Standard atmosphere | Calculation | Pound per square inch |
|---|---|---|
| 1 atm | 1 atm × 14.69595 = 14.69595 psi | 14.69595 psi |
| 2 atm | 2 atm × 14.69595 = 29.3919 psi | 29.3919 psi |
| 3 atm | 3 atm × 14.69595 = 44.08785 psi | 44.08785 psi |
| 5 atm | 5 atm × 14.69595 = 73.47974 psi | 73.47974 psi |
| 7 atm | 7 atm × 14.69595 = 102.8716 psi | 102.8716 psi |
| 10 atm | 10 atm × 14.69595 = 146.9595 psi | 146.9595 psi |
| 12 atm | 12 atm × 14.69595 = 176.3514 psi | 176.3514 psi |
| 15 atm | 15 atm × 14.69595 = 220.4392 psi | 220.4392 psi |
| 20 atm | 20 atm × 14.69595 = 293.919 psi | 293.919 psi |
| 25 atm | 25 atm × 14.69595 = 367.3987 psi | 367.3987 psi |
| 50 atm | 50 atm × 14.69595 = 734.7974 psi | 734.7974 psi |
| 100 atm | 100 atm × 14.69595 = 1,469.595 psi | 1,469.595 psi |
Common Standard atmosphere to Pound per square inch conversions
These are the standard atmosphere-to-pound per square inch values people look up most often. Every figure is computed from the exact factor, so you can rely on them for quick reference:
- 1 standard atmosphere = 14.69595 pound per square inch
- 2 standard atmosphere = 29.3919 pound per square inch
- 2.5 standard atmosphere = 36.73987 pound per square inch
- 3 standard atmosphere = 44.08785 pound per square inch
- 4 standard atmosphere = 58.7838 pound per square inch
- 5 standard atmosphere = 73.47974 pound per square inch
- 6 standard atmosphere = 88.17569 pound per square inch
- 7 standard atmosphere = 102.8716 pound per square inch
- 8 standard atmosphere = 117.5676 pound per square inch
- 9 standard atmosphere = 132.2635 pound per square inch
- 10 standard atmosphere = 146.9595 pound per square inch
- 12 standard atmosphere = 176.3514 pound per square inch
- 15 standard atmosphere = 220.4392 pound per square inch
- 20 standard atmosphere = 293.919 pound per square inch
- 25 standard atmosphere = 367.3987 pound per square inch
- 30 standard atmosphere = 440.8785 pound per square inch
- 50 standard atmosphere = 734.7974 pound per square inch
- 75 standard atmosphere = 1,102.196 pound per square inch
- 100 standard atmosphere = 1,469.595 pound per square inch
- 200 standard atmosphere = 2,939.19 pound per square inch
- 500 standard atmosphere = 7,347.974 pound per square inch
- 1000 standard atmosphere = 14,695.95 pound per square inch
Standard atmosphere to Pound per square inch conversion chart (both directions)
The chart below converts standard atmosphere to pound per square inch and pound per square inch to standard atmosphere side by side, so it works whichever way you need. 1 standard atmosphere = 14.69595 pound per square inch, and 1 pound per square inch = 0.06804596 standard atmosphere.
| Standard atmosphere → Pound per square inch | Pound per square inch → Standard atmosphere |
|---|---|
| 0.25 atm = 3.673987 psi | 0.25 psi = 0.01701149 atm |
| 0.5 atm = 7.347974 psi | 0.5 psi = 0.03402298 atm |
| 1 atm = 14.69595 psi | 1 psi = 0.06804596 atm |
| 2 atm = 29.3919 psi | 2 psi = 0.1360919 atm |
| 3 atm = 44.08785 psi | 3 psi = 0.2041379 atm |
| 4 atm = 58.7838 psi | 4 psi = 0.2721839 atm |
| 5 atm = 73.47974 psi | 5 psi = 0.3402298 atm |
| 6 atm = 88.17569 psi | 6 psi = 0.4082758 atm |
| 7 atm = 102.8716 psi | 7 psi = 0.4763217 atm |
| 8 atm = 117.5676 psi | 8 psi = 0.5443677 atm |
| 9 atm = 132.2635 psi | 9 psi = 0.6124137 atm |
| 10 atm = 146.9595 psi | 10 psi = 0.6804596 atm |
| 12 atm = 176.3514 psi | 12 psi = 0.8165516 atm |
| 15 atm = 220.4392 psi | 15 psi = 1.020689 atm |
| 20 atm = 293.919 psi | 20 psi = 1.360919 atm |
| 25 atm = 367.3987 psi | 25 psi = 1.701149 atm |
| 30 atm = 440.8785 psi | 30 psi = 2.041379 atm |
| 40 atm = 587.838 psi | 40 psi = 2.721839 atm |
| 50 atm = 734.7974 psi | 50 psi = 3.402298 atm |
| 75 atm = 1,102.196 psi | 75 psi = 5.103447 atm |
| 100 atm = 1,469.595 psi | 100 psi = 6.804596 atm |
| 150 atm = 2,204.392 psi | 150 psi = 10.20689 atm |
| 200 atm = 2,939.19 psi | 200 psi = 13.60919 atm |
| 250 atm = 3,673.987 psi | 250 psi = 17.01149 atm |
| 500 atm = 7,347.974 psi | 500 psi = 34.02298 atm |
| 1000 atm = 14,695.95 psi | 1000 psi = 68.04596 atm |
Standard atmosphere vs Pound per square inch: which is bigger?
A standard atmosphere is the larger unit: one standard atmosphere equals 14.69595 pound per square inchs. Put another way, you need 14.69595 pound per square inchs to make a single standard atmosphere.
What is a Standard atmosphere? History, origin and usage
The standard atmosphere was fixed by the 10th General Conference on Weights and Measures in 1954 at exactly 101,325 pascals. Before that, "one atmosphere" meant whatever a 760 mm mercury column happened to weigh, which depended on local gravity and on the temperature of the mercury — so the same experiment gave slightly different answers in different laboratories. Fixing it as a defined number ended that.
Atmospheres are used in chemistry, physics, diving and any field that talks about pressure as a multiple of ordinary air pressure — reaction conditions, gas laws, hyperbaric medicine and pressure-vessel ratings.
It is a defined constant, not a measurement, so it never changes with the weather or with where you are standing. Real sea-level pressure wanders a few per cent either side of it every week. The deepest point of the ocean sits at roughly 1,100 atmospheres.
What is a Pound per square inch? History, origin and usage
Pounds per square inch grew directly out of the steam age: boiler safety valves were rated by how many pounds of weight it took to hold them shut over a known area, and the unit survived into every later technology that Britain and the United States industrialised. It never went through a formal international definition of its own — instead it became exact in 1959, when the yard-and-pound agreement fixed the pound and the inch exactly, and again through the fixing of standard gravity, which pins down what a "pound of force" means.
Psi is the standard pressure unit in the United States and remains widely understood in Britain, India and elsewhere: tyre pressures, air compressors, pressure washers, water mains, hydraulic lines and scuba tanks. Car tyres are commonly inflated to around 30 to 35 psi.
Psi is exactly defined but its value in pascals is a decimal that repeats forever, so any written figure is necessarily rounded somewhere. Gauges usually read gauge pressure — the amount above surrounding air — which is why a flat tyre reads zero rather than about 14.7.
Convert 1 Standard atmosphere to other units
It can help to see a standard atmosphere next to the other units it is commonly compared with. One standard atmosphere (atm) is equal to:
| 1 Standard atmosphere equals | Unit |
|---|---|
| 101,325 Pa | Pascal |
| 1,013.25 hPa | Hectopascal |
| 101.325 kPa | Kilopascal |
| 0.101325 MPa | Megapascal |
| 1,013.25 mbar | Millibar |
| 1.01325 bar | Bar |
| 760 Torr | Torr |
| 759.9999 mmHg | Millimetre of mercury |
| 29.92126 inHg | Inch of mercury |
| 10,332.27 mmH₂O | Millimetre of water |
| 406.7825 inH₂O | Inch of water |
| 14.69595 psi | Pound per square inch |
| 1.033227 kgf/cm² | Kilogram-force per square centimetre |
Convert 1 Pound per square inch to other units
One pound per square inch (psi) is equal to:
| 1 Pound per square inch equals | Unit |
|---|---|
| 6,894.757 Pa | Pascal |
| 68.94757 hPa | Hectopascal |
| 6.894757 kPa | Kilopascal |
| 0.006894757 MPa | Megapascal |
| 68.94757 mbar | Millibar |
| 0.06894757 bar | Bar |
| 0.06804596 atm | Standard atmosphere |
| 51.71493 Torr | Torr |
| 51.71493 mmHg | Millimetre of mercury |
| 2.036021 inHg | Inch of mercury |
| 703.0696 mmH₂O | Millimetre of water |
| 27.6799 inH₂O | Inch of water |
| 0.07030696 kgf/cm² | Kilogram-force per square centimetre |
Tips for converting Standard atmosphere to Pound per square inch
- To go from standard atmosphere to pound per square inch, multiply by 14.69595; to go back, divide by 14.69595 (or multiply by 0.06804596).
- For a quick mental estimate, remember that 1 standard atmosphere ≈ 14.69595 pound per square inch, so 10 standard atmosphere ≈ 146.9595 pound per square inch.
- The converter above keeps full precision; the tables round for readability, so use the tool for exact figures.
- Both fields update live as you type — change either side to convert in that direction.
How to use this Standard atmosphere to Pound per square inch converter
Type a number into the Standard atmosphere field and the equivalent in Pound per square inch appears instantly — there is no “convert” button to press and nothing is sent to a server, so it works offline once the page has loaded and is safe for any data. You can also type into the Pound per square inch field to convert the other way (pound per square inch to standard atmosphere). Use the swap control to flip the two units, and copy the result with a single click. Because the calculation runs in your browser with full floating-point precision, the converter is more exact than the rounded figures shown in the reference chart above — use the chart for quick look-ups and the tool for precise work.
Accuracy and method
Every figure on this page — the formula, the worked examples, the conversion chart and the “convert to other units” tables — is computed from a single verified conversion factor (1 atm = 14.69595 psi), never copied from a hand-typed lookup table that could drift. That factor is derived from each unit’s definition in terms of a common base unit, and an automated check re-verifies all of the site’s factors on every update, so the numbers here stay correct over time. This matters for standard atmosphere-to-pound per square inch conversions because a small rounding error in a published table compounds quickly at larger quantities; computing from the exact factor avoids that.
Sources
- NIST Special Publication 811 — Guide for the Use of the SI — publishes the exact metric equivalents of the customary pressure units. A psi is one pound of force over one square inch, and the 1959 international yard-and-pound agreement fixes the pound at exactly 0.453 592 37 kilogram and the inch at exactly 0.0254 metre, while standard gravity is fixed at exactly 9.806 65 m/s² — so psi, inches of mercury and inches of water are defined exactly rather than measured.
- BIPM — The International System of Units (SI Brochure) — the defining document for the SI, published by the International Bureau of Weights and Measures. It fixes the base unit that this conversion resolves to, which is why the factor here can be exact rather than approximate.
Pressure factors here come from fixed definitions, anchored to the pascal: a bar is exactly 100,000 Pa, one atmosphere is exactly 101,325 Pa, a torr is exactly a 760th of an atmosphere, and psi is built from the exact pound and the exact inch. Two of them — psi and the torr — work out to decimals that repeat forever, so where a number is shown rounded it is marked, not quietly trimmed.
Frequently asked questions
- How many pound per square inch are in 1 standard atmosphere?
- 1 standard atmosphere = 14.69595 pound per square inch (psi). To convert any number of standard atmosphere to pound per square inch, multiply by 14.69595.
- How do I convert standard atmosphere to pound per square inch?
- Multiply the number of standard atmosphere by 14.69595. For example, 10 standard atmosphere = 10 × 14.69595 = 146.9595 pound per square inch, and 25 standard atmosphere = 367.3987 pound per square inch.
- How many standard atmosphere are in 1 pound per square inch?
- 1 pound per square inch = 0.06804596 standard atmosphere. So to convert pound per square inch back to standard atmosphere, multiply by 0.06804596.
- What is the formula to convert standard atmosphere to pound per square inch?
- pound per square inch = standard atmosphere × 14.69595. The reverse formula is standard atmosphere = pound per square inch × 0.06804596.
- How much is 100 standard atmosphere in pound per square inch?
- 100 standard atmosphere = 1,469.595 pound per square inch. (And 1000 standard atmosphere = 14,695.95 pound per square inch.)
- Which is bigger, a standard atmosphere or a pound per square inch?
- A standard atmosphere is larger: 1 standard atmosphere = 14.69595 pound per square inch.
- Is this standard atmosphere to pound per square inch converter accurate?
- Yes — every value is computed from the exact 14.69595 psi per atm factor (not rounded look-up tables), and the factors are re-verified automatically on every update.
- Can I convert pound per square inch to standard atmosphere too?
- Yes. The converter works both ways — enter a value in either field. 1 pound per square inch = 0.06804596 standard atmosphere.