Convert Marla to Are
1 marla = 0.2529285 are (are). For example, 10 marla = 2.529285 are and 100 marla = 25.29285 are. Type any value below to convert marla to are both ways — it runs entirely in your browser.
Quick answer: Marla to Are
1 Marla = 0.2529285 Are (marla → are). To convert marla to are, multiply by 0.2529285. To convert are to marla, multiply by 3.953686. The converter at the top does this instantly and both ways; the sections below give the formula, worked examples, a full conversion chart and answers to the most common marla-to-are questions.
How to convert Marla to Are
To convert marla to are, multiply the number of marla by the conversion factor 0.2529285, because 1 marla = 0.2529285 are. The conversion is linear, so the same factor works for any value — whole numbers, decimals or fractions. For the reverse direction, 1 are = 3.953686 marla, so you divide by 0.2529285 (or multiply by 3.953686) to turn are back into marla.
are = marla × 0.2529285 ·
marla = are × 3.953686
- Write down the value you want to convert, in marla.
- Multiply it by 0.2529285.
- The result is the same area/length/quantity expressed in are.
Marla to Are — worked examples
Each row shows the exact arithmetic so you can follow the conversion step by step. For example, 5 marla is 1.264643 are because 5 marla × 0.2529285 = 1.264643 are.
| Marla | Calculation | Are |
|---|---|---|
| 1 marla | 1 marla × 0.2529285 = 0.2529285 are | 0.2529285 are |
| 2 marla | 2 marla × 0.2529285 = 0.5058571 are | 0.5058571 are |
| 3 marla | 3 marla × 0.2529285 = 0.7587856 are | 0.7587856 are |
| 5 marla | 5 marla × 0.2529285 = 1.264643 are | 1.264643 are |
| 7 marla | 7 marla × 0.2529285 = 1.7705 are | 1.7705 are |
| 10 marla | 10 marla × 0.2529285 = 2.529285 are | 2.529285 are |
| 12 marla | 12 marla × 0.2529285 = 3.035142 are | 3.035142 are |
| 15 marla | 15 marla × 0.2529285 = 3.793928 are | 3.793928 are |
| 20 marla | 20 marla × 0.2529285 = 5.058571 are | 5.058571 are |
| 25 marla | 25 marla × 0.2529285 = 6.323213 are | 6.323213 are |
| 50 marla | 50 marla × 0.2529285 = 12.64643 are | 12.64643 are |
| 100 marla | 100 marla × 0.2529285 = 25.29285 are | 25.29285 are |
Common Marla to Are conversions
These are the marla-to-are values people look up most often. Every figure is computed from the exact factor, so you can rely on them for quick reference:
- 1 marla = 0.2529285 are
- 2 marla = 0.5058571 are
- 2.5 marla = 0.6323213 are
- 3 marla = 0.7587856 are
- 4 marla = 1.011714 are
- 5 marla = 1.264643 are
- 6 marla = 1.517571 are
- 7 marla = 1.7705 are
- 8 marla = 2.023428 are
- 9 marla = 2.276357 are
- 10 marla = 2.529285 are
- 12 marla = 3.035142 are
- 15 marla = 3.793928 are
- 20 marla = 5.058571 are
- 25 marla = 6.323213 are
- 30 marla = 7.587856 are
- 50 marla = 12.64643 are
- 75 marla = 18.96964 are
- 100 marla = 25.29285 are
- 200 marla = 50.58571 are
- 500 marla = 126.4643 are
- 1000 marla = 252.9285 are
Marla to Are conversion chart (both directions)
The chart below converts marla to are and are to marla side by side, so it works whichever way you need. 1 marla = 0.2529285 are, and 1 are = 3.953686 marla.
| Marla → Are | Are → Marla |
|---|---|
| 0.25 marla = 0.06323213 are | 0.25 are = 0.9884215 marla |
| 0.5 marla = 0.1264643 are | 0.5 are = 1.976843 marla |
| 1 marla = 0.2529285 are | 1 are = 3.953686 marla |
| 2 marla = 0.5058571 are | 2 are = 7.907372 marla |
| 3 marla = 0.7587856 are | 3 are = 11.86106 marla |
| 4 marla = 1.011714 are | 4 are = 15.81474 marla |
| 5 marla = 1.264643 are | 5 are = 19.76843 marla |
| 6 marla = 1.517571 are | 6 are = 23.72212 marla |
| 7 marla = 1.7705 are | 7 are = 27.6758 marla |
| 8 marla = 2.023428 are | 8 are = 31.62949 marla |
| 9 marla = 2.276357 are | 9 are = 35.58317 marla |
| 10 marla = 2.529285 are | 10 are = 39.53686 marla |
| 12 marla = 3.035142 are | 12 are = 47.44423 marla |
| 15 marla = 3.793928 are | 15 are = 59.30529 marla |
| 20 marla = 5.058571 are | 20 are = 79.07372 marla |
| 25 marla = 6.323213 are | 25 are = 98.84215 marla |
| 30 marla = 7.587856 are | 30 are = 118.6106 marla |
| 40 marla = 10.11714 are | 40 are = 158.1474 marla |
| 50 marla = 12.64643 are | 50 are = 197.6843 marla |
| 75 marla = 18.96964 are | 75 are = 296.5265 marla |
| 100 marla = 25.29285 are | 100 are = 395.3686 marla |
| 150 marla = 37.93928 are | 150 are = 593.0529 marla |
| 200 marla = 50.58571 are | 200 are = 790.7372 marla |
| 250 marla = 63.23213 are | 250 are = 988.4215 marla |
| 500 marla = 126.4643 are | 500 are = 1,976.843 marla |
| 1000 marla = 252.9285 are | 1000 are = 3,953.686 marla |
Marla vs Are: which is bigger?
A are is the larger unit: one are equals 3.953686 marlas. Put another way, you need 3.953686 marlas to make a single are.
What is a Marla? History, origin and usage
The marla is a traditional unit of the Indian subcontinent that the British Raj standardised to one square rod (a rod, or pole, being 5.5 yards). That fixed it at 272.25 square feet, or 30.25 square yards, the value still used in Pakistan and Bangladesh.
Marla is most prominent in Pakistani Punjab and in the Indian states of Punjab, Haryana, Himachal Pradesh and Jammu and Kashmir, where residential plots are sold in marlas and kanals. In India its use is gradually declining in favour of the square yard, square metre, acre and hectare.
Twenty marla make one kanal and 160 marla make one acre. In the Punjab survey system nine sarsahi (square karam) make exactly one marla.
What is a Are? History, origin and usage
The are is the original metric unit of land area, established by the French Revolutionary metric law of 1795 as 100 square metres. Its name comes from the Latin area, and it gave rise to the much more widely used hectare (100 ares).
Today the are itself is rarely used in everyday measurement, having been largely displaced by the square metre and the hectare. It survives mainly in a few European cadastral contexts and as the building block from which the hectare is defined.
One are is a square of 10 metres by 10 metres, and 100 ares make one hectare. It is one of the few metric units whose name survives chiefly inside a larger derived unit.
Convert 1 Marla to other units
It can help to see a marla next to the other units it is commonly compared with. One marla (marla) is equal to:
| 1 Marla equals | Unit |
|---|---|
| 30.25 gaj | Gaj |
| 0.05 kanal | Kanal |
| 0.00625 killa | Killa |
| 0.00025 murabba | Murabba |
| 0.625 decimal | Decimal |
| 0.625 cent | Cent |
| 0.25 guntha | Guntha |
| 0.00625 ac | Acre |
| 0.002529285 ha | Hectare |
| 272.25 ft² | Square Foot |
| 30.25 yd² | Square Yard |
| 25.29285 m² | Square Metre |
| 252,928.5 cm² | Square Centimetre |
| 25,292,850 mm² | Square Millimetre |
| 39,204 in² | Square Inch |
| 0.00002529285 km² | Square Kilometre |
| 0.2529285 are | Are |
| 0.02529285 daa | Decare |
| 0.000009765625 mi² | Square Mile |
| 0.00625 ac | Acre |
| 30.25 yd² | Square Yard |
| 272.25 ft² | Square Foot |
| 0.002529285 ha | Hectare |
| 9 karam² | Square Karam |
| 0.1134375 ground | Ground |
| 1.890625 lessa | Lessa |
| 6.05 chatak | Chatak |
| 0.004726562 pura | Pura |
Convert 1 Are to other units
One are (are) is equal to:
| 1 Are equals | Unit |
|---|---|
| 119.599 gaj | Gaj |
| 3.953686 marla | Marla |
| 0.1976843 kanal | Kanal |
| 0.02471054 killa | Killa |
| 0.0009884215 murabba | Murabba |
| 2.471054 decimal | Decimal |
| 2.471054 cent | Cent |
| 0.9884215 guntha | Guntha |
| 0.02471054 ac | Acre |
| 0.01 ha | Hectare |
| 1,076.391 ft² | Square Foot |
| 119.599 yd² | Square Yard |
| 100 m² | Square Metre |
| 1,000,000 cm² | Square Centimetre |
| 100,000,000 mm² | Square Millimetre |
| 155,000.3 in² | Square Inch |
| 0.0001 km² | Square Kilometre |
| 0.1 daa | Decare |
| 0.00003861022 mi² | Square Mile |
| 0.02471054 ac | Acre |
| 119.599 yd² | Square Yard |
| 1,076.391 ft² | Square Foot |
| 0.01 ha | Hectare |
| 35.58317 karam² | Square Karam |
| 0.4484963 ground | Ground |
| 7.474938 lessa | Lessa |
| 23.9198 chatak | Chatak |
| 0.01868734 pura | Pura |
Tips for converting Marla to Are
- To go from marla to are, multiply by 0.2529285; to go back, divide by 0.2529285 (or multiply by 3.953686).
- For a quick mental estimate, remember that 1 marla ≈ 0.2529285 are, so 10 marla ≈ 2.529285 are.
- The converter above keeps full precision; the tables round for readability, so use the tool for exact figures.
- Both fields update live as you type — change either side to convert in that direction.
How to use this Marla to Are converter
Type a number into the Marla field and the equivalent in Are appears instantly — there is no “convert” button to press and nothing is sent to a server, so it works offline once the page has loaded and is safe for any data. You can also type into the Are field to convert the other way (are to marla). Use the swap control to flip the two units, and copy the result with a single click. Because the calculation runs in your browser with full floating-point precision, the converter is more exact than the rounded figures shown in the reference chart above — use the chart for quick look-ups and the tool for precise work.
Accuracy and method
Every figure on this page — the formula, the worked examples, the conversion chart and the “convert to other units” tables — is computed from a single verified conversion factor (1 marla = 0.2529285 are), never copied from a hand-typed lookup table that could drift. That factor is derived from each unit’s definition in terms of a common base unit, and an automated check re-verifies all of the site’s factors on every update, so the numbers here stay correct over time. This matters for marla-to-are conversions because a small rounding error in a published table compounds quickly at larger quantities; computing from the exact factor avoids that.
Sources
- Department of Land Resources, Ministry of Rural Development (India) — the central department responsible for land records and the Digital India Land Records Modernisation Programme, under which the state portals are maintained.
- Bihar Bhumi — Revenue & Land Reforms Department, Bihar — the official Bihar land-record portal; the authority for the katha, dhur and dhurki values used in Bihar revenue records.
- UP Bhulekh — Uttar Pradesh land records — the official Uttar Pradesh record-of-rights portal, used to corroborate bigha and biswa values for UP.
- BIPM — The International System of Units (SI Brochure) — the defining document for the SI, published by the International Bureau of Weights and Measures. It fixes the base unit that this conversion resolves to, which is why the factor here can be exact rather than approximate.
- NIST — Definitions of the SI base units — the US National Institute of Standards and Technology reference for the SI base units, used here as an independent cross-check on the base-unit definition.
Indian land units can vary by state and local custom. This converter uses the most widely accepted standard value; always confirm against your local revenue records (patwari / tehsil) for legal transactions.
Frequently asked questions
- How many are are in 1 marla?
- 1 marla = 0.2529285 are (are). To convert any number of marla to are, multiply by 0.2529285.
- How do I convert marla to are?
- Multiply the number of marla by 0.2529285. For example, 10 marla = 10 × 0.2529285 = 2.529285 are, and 25 marla = 6.323213 are.
- How many marla are in 1 are?
- 1 are = 3.953686 marla. So to convert are back to marla, multiply by 3.953686.
- What is the formula to convert marla to are?
- are = marla × 0.2529285. The reverse formula is marla = are × 3.953686.
- How much is 100 marla in are?
- 100 marla = 25.29285 are. (And 1000 marla = 252.9285 are.)
- Which is bigger, a marla or a are?
- A are is larger: 1 are = 3.953686 marla.
- Is this marla to are converter accurate?
- Yes — every value is computed from the exact 0.2529285 are per marla factor (not rounded look-up tables), and the factors are re-verified automatically on every update.
- Can I convert are to marla too?
- Yes. The converter works both ways — enter a value in either field. 1 are = 3.953686 marla.